Shop OBEX P1 Docs P2 Docs Learn Events
Salvaging USB plug off of Propeller Proto USB board — Parallax Forums

Salvaging USB plug off of Propeller Proto USB board

RagtopRagtop Posts: 406
edited 2010-09-10 07:57 in Propeller 1
I took hacking a bit literal when I could not un-solder a compass module from my proto USB board and I am now trying to salvage parts from the board.

I would like to use the USB port.

It looks like the blue traces encircle four pinholes adjoining the port. Does this mean these pin holes are linked to VSS,RES,TX,RX? Is their a schematic for this board?

Comments

  • RagtopRagtop Posts: 406
    edited 2010-09-10 07:57
    The manual has a schematic but doesn't mention if the adjoining pinholes are linked to the prop plug or give a schematic for the prop plug.

    I tried soldering leads to the four pinholes. The plug is recognized by windows but no chip is found. I reversed the leads and still nothing. Assuming the
    pinholes are not connected to the prop plug.
Sign In or Register to comment.