Testing Attachments and Inserts

Whit

This is a test.

Propeller Spin

'' File: PushbuttonLedTest.spin
'' Test program for the Propeller Education Lab "PE Platform Setup"
CON
  _clkmode        = xtal1 + pll16x           ' Feedback and PLL multiplier
  _xinfreq        = 5_000_000                ' External oscillator = 5 MHz
  LEDs_START      = 0                        ' Start of I/O pin group for on/off signals
  LEDs_END        = 15                       ' End of I/O pin group for on/off signals
  PUSHBUTTON      = 18                       ' Pushbutton Input Pin
PUB ButtonBlinkSpeed                         ' Main method
  '' Sends on/off (3.3 V / 0 V) signals at approximately 2 Hz. 
  dira[LEDs_START..LEDs_END]~~               ' Set entire pin group to output
  repeat                                     ' Endless loop
    ! outa[LEDs_START..LEDs_END]             ' Change the state of pin group
 
    if ina[PUSHBUTTON] == 1                  ' If pushbutton pressed
      waitcnt(clkfreq / 4 + cnt)             ' Wait 1/4 second -> 2 Hz
    else                                     ' If pushbutton not pressed
      waitcnt(clkfreq / 20 + cnt)            ' Wait 1/20 second -> 10 Hz

PBASIC

' What's a  Microcontroller - FirstProgram.bs2
' BASIC Stamp sends a message to Debug Terminal.
' {$STAMP BS2}
' {$PBASIC 2.5}
DEBUG "Hello, it's me, your BASIC Stamp!"
END

E-mail link
test@test.com

And picture inserted...

Whit

Looks like it works! :rolleyes:

WBA Consulting

attachment tests

WBA Consulting

blah blah blah for the 10 character minimum.


gfh

WBA Consulting

some notes from my playing around.....

1. Even though you can size inline images in the advanced editor, they still end up full size in the post.
2. You can upload jpeg files above the file size restrictions and they are automatically compressed to 800x600 and under the file size restriction.