(Untitled)
markuster
Posts: 184
Hi
I need Basic Stamps only for school educational purpose.
(Moving servos, use of Parallax sensors and general robotics ) .
In fact BS2-Pe, BS2PX , or BS2P40 are more than I need
but now my only one problem is to know which Basic Stamp
will need less manufacturing accuracy.
For example (example only) : Supose that the EEprom must be welded exactly at
0.1" from the resonator for Basic Stamp 2PX ,
but the EEprom for the Basic Stamp 2Pe could be welded between
0.1" to 0.2" from the resonator.
In this case the Basic Stamp 2PX need more manufacturing acuracy than Basic Stamp
2Pe ( of course this in an example only)
I hope I have explained my self. If not please let me know.
That is the reason I don't know if all Basic Stamp need the same
manufacturing acuracy.
Thanks again , Mark.
I need Basic Stamps only for school educational purpose.
(Moving servos, use of Parallax sensors and general robotics ) .
In fact BS2-Pe, BS2PX , or BS2P40 are more than I need
but now my only one problem is to know which Basic Stamp
will need less manufacturing accuracy.
For example (example only) : Supose that the EEprom must be welded exactly at
0.1" from the resonator for Basic Stamp 2PX ,
but the EEprom for the Basic Stamp 2Pe could be welded between
0.1" to 0.2" from the resonator.
In this case the Basic Stamp 2PX need more manufacturing acuracy than Basic Stamp
2Pe ( of course this in an example only)
I hope I have explained my self. If not please let me know.
That is the reason I don't know if all Basic Stamp need the same
manufacturing acuracy.
Thanks again , Mark.
Comments
click mouse here:
http://forums.parallax.com/forums/default.aspx?f=5&m=473578
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"puff"...... Smile, there went another one.