Shop OBEX P1 Docs P2 Docs Learn Events
Anyone have video of Mike Green's femtoBasic talk at UPEW ? — Parallax Forums

Anyone have video of Mike Green's femtoBasic talk at UPEW ?

BeanBean Posts: 8,129
edited 2010-07-01 19:51 in Propeller 1
I'd love to see it.
I'd even settle for just the audio if anyone has it.

Bean


▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Use BASIC on the Propeller with the speed of assembly language.
PropBASIC thread http://forums.parallax.com/showthread.php?p=867134

March 2010 Nuts and Volts article·http://www.parallax.com/Portals/0/Downloads/docs/cols/nv/prop/col/nvp5.pdf
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
There are two rules in life:
· 1) Never divulge all information
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you choose not to decide, you still have made a choice. [noparse][[/noparse]RUSH - Freewill]

Comments

  • Little-endianLittle-endian Posts: 91
    edited 2010-07-01 13:46
    Me too!
  • AJMAJM Posts: 171
    edited 2010-07-01 14:03
    I would like to see this as well as all of the presentations.
  • RaymanRayman Posts: 14,889
    edited 2010-07-01 14:14
    I was expecting Parallax to run their camcorders like last year, but they didn't. Maybe because it's so much work to edit all the video...

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    My Prop Apps:· http://www.rayslogic.com/propeller/Programming/Programming.htm

    My Prop Info: ·http://www.rayslogic.com/propeller/propeller.htm
    My Prop Products:· http://www.rayslogic.com/Propeller/Products/Products.htm
  • heaterheater Posts: 3,370
    edited 2010-07-01 14:21
    Don't say that stream did not get recorded in any part anywhere.

    I need to see Bill's "long and boring" talk, his words not mine.

    I did see Mike though, excellent.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    For me, the past is not over yet.
  • hover1hover1 Posts: 1,929
    edited 2010-07-01 14:30
    I believe Jeff (OBC) mentioned that since it was a free Ustream account, there was no archiving. sad.gif

    Jim
    heater said...
    Don't say that stream did not get recorded in any part anywhere.

    I need to see Bill's "long and boring" talk, his words not mine.

    I did see Mike though, excellent.

  • StefanL38StefanL38 Posts: 2,292
    edited 2010-07-01 15:24
    so did somebody who WATCHED the recording too?
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2010-07-01 17:08
    The recording of Mike, Rick, most of Chip and the Tour made it to a Parallax Camera. (Jeff Martin's gear)

    Since they are doing inventory, it might be a bit before those videos are published, but they do exist. [noparse]:)[/noparse]

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Propeller Feature Projects: PropellerPowered.com
    Visit the: PROPELLERPOWERED SIG forum kindly hosted by Savage Circuits.
  • heaterheater Posts: 3,370
    edited 2010-07-01 17:22
    StefanL38: Apparently some did watch Bill's talk but there were few survivors.

    OK I'm looking forward to seeing Chip then.

    Sorry Bill, only kidding around.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    For me, the past is not over yet.
  • hover1hover1 Posts: 1,929
    edited 2010-07-01 17:24
    That's good news Jeff, and Jeff M. to the rescue again! Plus Chris is going to put up a presentation of Bill's boards on Savage Circuits. It's all coming together!

    Jim
    Oldbitcollector said...
    The recording of Mike, Rick, most of Chip and the Tour made it to a Parallax Camera. (Jeff Martin's gear)

    Since they are doing inventory, it might be a bit before those videos are published, but they do exist. [noparse]:)[/noparse]

    OBC

  • BigFootBigFoot Posts: 259
    edited 2010-07-01 19:51
    That's good news Jeff,

    I missed Mikes talk. Chips talk on the TurboProp was great !

    Russ
Sign In or Register to comment.