2.5" Color LCD Composite Video Monitors FOR SALE! only $10 plus Postage
NiteMax Mark
Posts: 20
This was posted·in the Sand Box but it occurs to me that there may be Propeller Chip users that might not see it there. I wish there was a way to move it over here instead!
FOR SALE:· 2.5" Color LCD Video Display System·$10 Each (plus shipping)
Since the Propeller can easily output Composite Video, these might be especially handy. The LCD comes complete with a Controller and needs just 12V DC and a Composite Video singal to work! I'll bet I've·got at least 100·of these·and I can sell them for $10 each plus the cost of shipping.
There's a good amount of photos and details on ther other thread linked below...
http://forums.parallax.com/showthread.php?p=882310
Please check out the information at the other thread first and post any questions or comments here.
Post Edited (NiteMax Mark) : 3/12/2010 1:04:31 AM GMT
FOR SALE:· 2.5" Color LCD Video Display System·$10 Each (plus shipping)
Since the Propeller can easily output Composite Video, these might be especially handy. The LCD comes complete with a Controller and needs just 12V DC and a Composite Video singal to work! I'll bet I've·got at least 100·of these·and I can sell them for $10 each plus the cost of shipping.
There's a good amount of photos and details on ther other thread linked below...
http://forums.parallax.com/showthread.php?p=882310
Please check out the information at the other thread first and post any questions or comments here.
Post Edited (NiteMax Mark) : 3/12/2010 1:04:31 AM GMT
Comments
I wonder if it really needs 12V, or if that gets dropped down to 5...
I'd put "$10" in your topic title, probably get more attention that way...
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm
My Prop Products:· http://www.rayslogic.com/Propeller/Products/Products.htm
There's also an inverter circuit that generates some high voltage to power the CCFL backlight on the LCD so you can see there's plenty of stuff happening on the LCD Controller PCB.
This stuff is considered "New Old Stock" which means they're brand new but they've been around a while.
I've had them for a few years and I'm sure they sat in a warehouse for a good long·time before I bought them.
These are incomplete assemblies for night vision viewers that were in the process of being built when the factory was abruptly closed.
They're not broken, rejects or returns, but they might have some light dust or maybe a finger print or two. The LCD itself still has a protective cover on it that you peel off.
My first priority is your satisfaction so you can be sure I'll set things straight if they're not what you expected.
I'm a hobbyist like·many of the people here and selling these is just part of cleaning house.
It's not worth any amount of Dollars to make people unhappy so please let me know if there's anything I can do to make sure you are completely satisfied with your purchase!
Post Edited (NiteMax Mark) : 3/12/2010 2:20:07 AM GMT
Thanks for making such an awesome offer available to the community. It's appreciated!
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Coming soon to a browser near you! PropellerPowered.com
Visit the: PROPELLERPOWERED SIG forum kindly hosted by Savage Circuits.
Actually, I bought the stepvan on eBay and my Wife almost killed me! I justified the expense because it was about the same price as a back-yard metal storage shed·but it was LOTS more·interesting to have. (And it probably wouldn't blow away in the first good wind storm.)·Plus it was less expensive than renting storage and the kids thought it was cool to be the only ones in school who's Dad had an "ice cream truck." At the time I bought it, I couldn't have imagined the things that would eventually follow.
When I·got the opportunity to buy the remaining "junk" from the NiteMax people it was completely unexpected and it litterally filled the whole truck. Boy was I glad I even HAD the truck in the first place because, without it, I couldn't have done anything with this crazy NiteMAX opportunity. (And yes, my Wife almost killed me AGAIN!) It took a few months, but I threw away plenty of useless stuff and sold a bunch of NiteMAX cameras on eBay too so it worked out beautifully.
Everything came to a halt when we had a new baby and my Wife ended up back·in the hospital again·only a·week after the baby was born. She was pretty sick and things were kind of rough for a while and it took almost six months to solve the medical mystery.·She ended up·being diagnosed with a somewhat rare disease and we've gone through some rought times financially due to lots of medical expenses.
At one point during the financial crisis we were traveling back from the Mayo Clinic a couple of states away and a had a connecting rod bearing fail in our well-used Suburban. I couldn't afford to fix it because, at that point, I was behind on almost everry bill we had so I ended up driving the "ice cream truck" back and forth to work for several months.
Ultimately the stepvan got sold and the money got tossed in to the bottomless pit of medical expenses and now we've got a bedroom with boxes stacked in the corner where the newest·child (who's now four) belongs instead of being with Mom and Dad.
So yes, that stupid stepvan avatar has a lot of history behind it and it has lots of memories of good and bad times associated with it.·I sure am grateful for each and every one of you that chooses to buy some of this stuff because it's helping me out more than you probably imagine. Obviously·the extra money I'm earning is appreciated, but it actually feels·best to be cleaning up some of the last remaining fallout from the crisis we've been through.
THANK YOU!
Post Edited (NiteMax Mark) : 3/12/2010 8:08:05 PM GMT
On the other Sand Box thread I've uploaded a datasheet for the LCD Controller that happens to include a 5.6" LCD. The important points in the data sheet are the LCD Controller details but it does give everyone a clue...
Somewhere in the world is a 5.6" LCD module that plugs right in to this LCD Controller!
I've always hoped I would find some surplus 5.6" LCD modules somewhere but I never have. The first person to find an inexpensive source of compatible LCD modules to match this controller deserves a prize!
·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm
My Prop Products:· http://www.rayslogic.com/Propeller/Products/Products.htm
The good news is that they got dropped of at the Post Office on Saturday and a couple of them actually got delivered on MONDAY! Wow... Priority Mail isn't the least expensive method but it can be fast at times and they provide the boxes which helps me out a lot.
I expect all the shipments from last week to reach everyone by Wednesday.
If anyone needs support,·consider posting it·here so that everyone else will benefit. If there's anything I need to do to make sure you're completely happy with your purchase, please let me know.
Thank you to everyone!
- Mark
I guess everyone's busy and I'm not so different myself. It sure has been quiet!
I'd love to see some of the ways these have been used and if you'd care to post a photo or two here I'd appreciate it.
If anyone is interested in some of the optional features, I'd be happy to help. It's easy enough to flip the image left, right or up and down for example.
There's also a clever way to make the display appear monochrome in any one of seven colors. For example, it's not so hard to make it green monochrome like an old fashioned CRT. (I attached an image to show the results.)
There's still the potential of finding a larger LCD that's compatable with the controller on these. One clue is how one of the datasheets actually describes a 5.6" LCD.
If anyone finds an inexpensive LCD that's missing a controller and you THINK it might be compatable, set me up with a datasheet and I'll see if it might work. If there's a public source for larger LCDs that's fairly inexpensive I'd consider buying one myself and testing it out with the controller so I can share the results with everyone here.
Post Edited (NiteMax Mark) : 4/23/2010 1:34:28 AM GMT
Never got a chance to say thanks for the monitors, they came all neatly packed up!
I went ahead and re-wired them so the power jacks work, and so that the switch turns them on.
This is one mounted inside of an empty external sound blaster housing, I've placed a Cat5e jack in it as well, I'm planning this to be a Tone Generator, Video Generator, Continuity Tester, and obviously a video test screen [noparse]:)[/noparse]
Next is to make use of the existing buttons, question- why does the picture get brighter when I press either button labeled "gain"?
Then I'd like to find a re-chargable battery solution.
Rick
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PrEditor·- Text Editor
NYC Area Prop Club
Jim
The LCD Controller has Brightness and Contrast inputs where a variable voltage controls the function. The default values are okay but you can tie a 5k Ohm potentiometer between the Controller's 5v Supply and Ground as an·effective way to·provide variable adjustments.
The "Gain" buttons·are wired to the Controller's Brightness Input and they basically max-out the brightness adjustment on the LCD Controller when you push the button.
Just got my screens yesterday (finally after 2 months)! Thank you very much for your attention and care to detail ensuring the parcel was
safely packed and your speedy shipment, much appreciated (not your fault Africa runs on continental time [noparse]:)[/noparse] ).
Thank you,
Wynand.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Why didn't I think of THAT!!!!
Post Edited (Wynand) : 6/2/2010 7:32:25 PM GMT
What a great idea.·
I'm·SO glad that this is now permitted.
Post Edit -- Ain't capriciousness and hypocrisy grand?
Post Edited (PJ Allen) : 6/2/2010 10:52:04 PM GMT
If I've missed anyone and you haven't heard from me in a while, please contact me again. There's still plenty of LCDs here.
Thank you!
·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Will work for Propeller parts!
Post Edited (blittled) : 7/22/2010 9:23:23 PM GMT
If you see this, I have sent you a PM. These Display units a great indeed...
Thanks
RizThomas