Shop OBEX P1 Docs P2 Docs Learn Events
BS2 survived 8v on VDD for a year ! — Parallax Forums

BS2 survived 8v on VDD for a year !

Peter KG6LSEPeter KG6LSE Posts: 1,383
edited 2010-01-30 20:59 in BASIC Stamp
Ok I have a HW board that I used for the T Box (T Hunt controller) .

My radio's mic plug puts out 8V to run the Mic's guts so I taped in to it for my T Box .
I ran the power to V in as its not 5V ..
and it ran great for many months off that power input .

Un known to me I tied Vin to VDD from a solder bridge .....Opps!
so the whole time Vdd was getting 8V!
.. So yesterday I was going to run the T Box off a the radios 12V in because i am using it with a radio that has no Mic Power out
.
And I did not want to kill my 9V Batt
it worked for 4 seconds and Poof !

there goes the stamp !
now its dead..

but I am amazed that for a year that thing ran with out issues on the 8 volts I fed it and did not choke right then anf there

and only after I put 12V to it did it fail



Peter KG6LSE

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"Carpe Ducktum" "seize the tape!!"
peterthethinker.com/tesla/Venom/Venom.html
Never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway. —Tanenbaum, Andrew S.
LOL

Comments

  • dandreaedandreae Posts: 1,375
    edited 2010-01-26 15:27
    Hi Peter,

    Great story!· Send me an e-mail at dandreae@parallax.com and we'll see what we can do to get you up and running again.

    Dave

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Dave Andreae

    Parallax Tech Support·
  • James LongJames Long Posts: 1,181
    edited 2010-01-26 15:33
    Wow......that is impressive.

    Trying to boost the Stamp with 160% power......... smilewinkgrin.gif

    That is cool though...I'm surprised it ran that long. Show you that Parallax does look at what parts they put in their products.

    James L

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    James L
    Partner/Designer
    Lil Brother SMT Assembly Services

    Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits. Learn to build your own Gizmos!
  • Peter KG6LSEPeter KG6LSE Posts: 1,383
    edited 2010-01-29 02:43
    Ok I was gutting the board for its Dsub and reset Tact switch and I had a idea ! the BS2 has a brown out detector .

    what if it died from the Over Voltage incendent ...
    So in typical "Peter'olgy" sense I removed it just as a last cause ....
    I applied a 9 V batt (mind you I removed the short by now )
    and behold the LED Power light is coming on !!!
    and 5V is back on the VDD !
    So I added a speaker to where the audio out is for the transmitter.. and its putting out the Morse code I wrote to it when I made it !
    OMG it has risen from the dead !

    So I am putting the Dsub back on and the Reset Tact switch and seeing if this thing will live a few more years...



    What harm could removing the brownout chip do ?

    My guess's it will not like being underpowered .. ever ..
    I will add photos as soon as I get my cam back from a friend..
    Peter KG6LSE .

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    "Carpe Ducktum" "seize the tape!!"
    peterthethinker.com/tesla/Venom/Venom.html
    Never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway. —Tanenbaum, Andrew S.
    LOL
  • Peter KG6LSEPeter KG6LSE Posts: 1,383
    edited 2010-01-30 20:59
    Ok it is working BUT it will not take a new programs so its stuck as a Thunt Tbox for the rest of its life ..
    .. Peter KG6LSE

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    "Carpe Ducktum" "seize the tape!!"
    peterthethinker.com/tesla/Venom/Venom.html
    Never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway. —Tanenbaum, Andrew S.
    LOL
Sign In or Register to comment.