Shop OBEX P1 Docs P2 Docs Learn Events
Controlling Servo with BS2 and VB (using Track Bar) — Parallax Forums

Controlling Servo with BS2 and VB (using Track Bar)

karabetkarabet Posts: 17
edited 2010-01-09 19:22 in BASIC Stamp
Hi,
I need to control a servo that is connected to Basic Stamp 2 via VB program, is there someone can help, did someone experienced this before can you please send me the VB code to control the servo and the diagram.....freaked.gif··
Regards,
Karabet


Post Edited (karabet) : 1/9/2010 7:08:33 PM GMT

Comments

  • Miles. kMiles. k Posts: 34
    edited 2010-01-09 17:29
    IM HERE TO HELP! [noparse]:)[/noparse] look at this link it should say every thing you need. iv done this before with this method. it works great. GOOD LUCK.

    http://www.schapirobotics.com/documents/VB2bb.pdf
  • karabetkarabet Posts: 17
    edited 2010-01-09 18:15
    Thanks Miles.k,
    I will try but do you have example for VB Track Bar?
    Regards,
    Karabet
  • Mike GreenMike Green Posts: 23,101
    edited 2010-01-09 18:57
    @karabet - Please add a subject to your thread. Use the pencil icon in the upper right-hand corner of your first message to add one.
  • Mike GreenMike Green Posts: 23,101
    edited 2010-01-09 19:22
    @karabet - Thanks for adding a subject to your thread. Unfortunately, you've added a new thread to the forum that's identical to this one. Please don't. It's against forum rules. You can delete it if no one has added a reply to it. Use the X icon in the upper right-hand corner of your first message. Please read the forum guidelines (in the Announcements forum).
Sign In or Register to comment.