Shop OBEX P1 Docs P2 Docs Learn Events
Serin problems - Page 2 — Parallax Forums

Serin problems

2»

Comments

  • pdiefendpdiefend Posts: 27
    edited 2010-01-04 17:09
    Yeah BOE with an extra bread board for the overflow circuitry.
  • stamptrolstamptrol Posts: 1,731
    edited 2010-01-04 17:29
    ·Is it possible to use a hardwired serial connection and temporarily remove the radios?

    ·That would likely show up a problem in coding or point to the radios picking up noise.

    ·Cheers,

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Tom Sisk

    http://www.siskconsult.com
    ·
  • pdiefendpdiefend Posts: 27
    edited 2010-01-04 17:52
    I would like to inform you all that the problem was resolved by adding a separate voltage regulator for the motor controller and keeping both the receiver and the motor controller on separate regulators completely solved the problem. There must have been some kind of feedback in the system that was causing the problem and the problem is gone now.

    Thank you to all of you who helped with this problem, and with your help the problem has been resolved.

    pdiefend
Sign In or Register to comment.