Detect tilt and quick motion with the new MMA7455 3-Axis Accelerometer Module.
New! MMA7455 3-Axis Accelerometer Module - Retail: $34.99
··
····· ·![attachment.php?attachmentid=63707](http://forums.parallax.com/attachment.php?attachmentid=63707)
The Freescale Semiconductor MMA7455L 3-Axis Digital Output Accelerometer is a low power, micro machined sensor capable of measuring acceleration along its X, Y, and Z axes. It offers several convenient integrated features including an analog to digital converter (ADC), digital low-pass filter, and selectable sensitivity ranges of ±2g, ±4g, or ±8g. This device can be easily configured to detect quick motion pulses as single taps, double taps, and 0g (free fall) conditions on any or all axes and provides configurable interrupt pins (INT1 and INT2) for each type of event.
Flexibility and compatibility are designed into this module. An on-board voltage regulator and I/O voltage level-shifters make this module especially easy to connect to virtually any microcontroller. It operates over a wide range of supply voltages from 2.5 VDC to 5.5 VDC and communicates via Serial Peripheral Interface (SPI) or Inter-Integrated Circuit (I2C) bus.
For more information visit: http://www.parallax.com/tabid/172/ProductID/585/Default.aspx
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·
Lauren Davis
Marketing Manager
Parallax, Inc.
916-624-8333
ldavis@parallax.com
·
Post Edited (Lauren Davis (Parallax)) : 9/12/2009 2:28:53 PM GMT
··
····· ·
The Freescale Semiconductor MMA7455L 3-Axis Digital Output Accelerometer is a low power, micro machined sensor capable of measuring acceleration along its X, Y, and Z axes. It offers several convenient integrated features including an analog to digital converter (ADC), digital low-pass filter, and selectable sensitivity ranges of ±2g, ±4g, or ±8g. This device can be easily configured to detect quick motion pulses as single taps, double taps, and 0g (free fall) conditions on any or all axes and provides configurable interrupt pins (INT1 and INT2) for each type of event.
Flexibility and compatibility are designed into this module. An on-board voltage regulator and I/O voltage level-shifters make this module especially easy to connect to virtually any microcontroller. It operates over a wide range of supply voltages from 2.5 VDC to 5.5 VDC and communicates via Serial Peripheral Interface (SPI) or Inter-Integrated Circuit (I2C) bus.
For more information visit: http://www.parallax.com/tabid/172/ProductID/585/Default.aspx
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·
Lauren Davis
Marketing Manager
Parallax, Inc.
916-624-8333
ldavis@parallax.com
·
Post Edited (Lauren Davis (Parallax)) : 9/12/2009 2:28:53 PM GMT