Has Anyone Done a Two or More Propeller Design That Fits the Arduino Physical S

Mike Huselton

Physical layout - any of the Arduino variations.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
JMH

localroger

It's not Arduino compatible but Bill Henning's Morpheus accepts plug-in expansion cards in the same way Arduino accepts shields, and it's a two-prop design.

Mike Huselton

Localroger, thanks for the direction.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
JMH

jazzed

I plan to put 8 Propellers in an Altoids tin [noparse]:)[/noparse]

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
--Steve

Propeller Tools

• Propalyzer: Propeller PC Logic Analyzer
• BMA: An on-chip PASM Debugger
• SPUD: Spin Source Level Debugger

Ariba

jazzed said...
I plan to put 8 Propellers in an Altoids tin [noparse]:)[/noparse]

Something like that?

SciNemo

Jazzed said...
I plan to put 8 Propellers in an Altoids tin [noparse]:)[/noparse]

I've put one prop in an altoids tin, good luck with 8.

@Ariba-lol

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Not the fish.
sites.google.com/site/bitwinproject/

Mike Huselton

Plans, schmans. Reality counts

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
JMH

hover1

That explains the Prop shortage. Andy has them all!!

Ariba said...

jazzed said...
I plan to put 8 Propellers in an Altoids tin [noparse]:)[/noparse]

Something like that?

Bill Henning

(thanks localroger)

Hi James,

There are currently three boards that stack on top of Morpheus:

Mem+ ...... adds 2MB of RAM, 16 bits parallel I/O, an RS232 programming/serial port, and an SD socket.
Propteus .... can be used as an add-on I/O processor with large prototyping area, servo headers and more (it can also work as a stand-alone development board) (Has access to Morpheus's EXP1, EXP2 and MORPHBUS (parallel bus with 24 bit addressing, 8 data bits))
Proteus .... a nice prototyping board for adding "stuff" to a Morpheus system (Has access to Morpheus's EXP1, EXP2 and MORPHBUS (parallel bus with 24 bit addressing, 8 data bits))

There will be more products coming for Morpheus before Xmas [noparse]:)[/noparse]
..... and even more next year.

See links in my .sig for more information, the downloads page has manuals on it.

James Michael Huselton said...
Localroger, thanks for the direction.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full
Morpheus & Mem+dual Prop SBC w/ 512KB kit $119.95, 2MB memory IO board kit $89.95, both kits $189.95
www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz
Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller

Clock Loop

James Michael Huselton said...
Physical layout - any of the Arduino variations.

Perhaps you can do it using this method?
(8 props using a single eeprom and crystal)

http://forums.parallax.com/showthread.php?p=835128

Cluso99

I have 5 props in a tube - Does that count



They cost me US$20 each ($12.99+freight) But at least I have them



▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBladeProp, RamBlade, TwinBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: Micros eg Altair, and Terminals eg VT100 (Index) ZiCog (Z80) , MoCog (6809)
· Search the Propeller forums·(uses advanced Google search)
My cruising website is: ·www.bluemagic.biz·· MultiBladeProp is: www.bluemagic.biz/cluso.htm

Post Edited (Cluso99) : 8/31/2009 6:39:11 AM GMT

RevAaron

One of the annoying things about the Arduino is the non-standard spacing of the headers- otherwise, you could whip up something that would take Arduino shields on top of the Protoboard. [noparse]:)[/noparse]

Since there doesn't appear to be such a beast yet, these may make great places to prototype one:

DIY Arduino Shield Kit
Arduino ProtoShield

or... stack a few Propellurinos, along with some sort of dummy board to provide power at the bottom! [noparse]:)[/noparse]

To get something with an identical board size and more than one Prop you'd be doing the kind of SMT work that a lot of hobbyists shy away from...

Toby Seckshund

The Sanguino used the ATMEGA644 which was/is DIP40, so they have their own compatability problems too.

It was the 32K ram and vid that dragged me away, at least I might have become more "C" ish had I stayed.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Style and grace : Nil point

Timmoore

sparkfun has a connector that changes the arduino spacing to standard 0.1"