Shop OBEX P1 Docs P2 Docs Learn Events
SOJ36 to DIP32 adapter PCB's available (So you can use 10ns SRAM's in DIP32 soc — Parallax Forums

SOJ36 to DIP32 adapter PCB's available (So you can use 10ns SRAM's in DIP32 soc

Bill HenningBill Henning Posts: 6,445
edited 2009-08-05 01:47 in Propeller 1
Over in another thread, jazzed said that kuroneko has figured out how to do 40MB/sec. See http://forums.parallax.com/forums/default.aspx?f=25&m=373109

And here I was, foolishly thinking that so far only I figured out how to do 40MB/sec!

Morpheus and Mem+ were designed to burst memory at 40MHz ... and even higher. In order to do that, I needed to be able to use faster SRAM's (ideally 10ns), so I designed a small SOJ36 to DIP32 adapter.

I was not going to announce it until I had it available for sale with fast memory surface mounted on it, but since people want to play with faster memory, I'll sell bare PCB's of it.

Allow me to introduce my SOJ36DIP32 adapter - specifically made to allow use of fast SOJ36 SRAM's on Morpheus, Mem+ and any other board that takes JDEC standard DIP32 memory smile.gif

$7.95 USD + S/H for a pack of four, 24.95 USD + S/H for a pack of sixteen, higher quantities available smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full
Morpheus & Mem+ Advanced dual Propeller SBC with XMM and 256 Color VGA - PCB, kit, A&T available NOW!
www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz
Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller

Post Edited (Bill Henning) : 8/5/2009 1:52:08 AM GMT
1200 x 915 - 601K

Comments

  • mikedivmikediv Posts: 825
    edited 2009-08-03 22:42
    Bill have you gotten any of my emails?? the address you sent the bill came in as 2cp motors this was my old shol and has been closed for years, can you send me the bill?? mike divicino I want to pay with credit card if thats ok with you also I just saw these new memory baord can you add 2 of them for me
    to the bill
    thanks
    so I am
    mike divicino
    59r pent rd
    durham ct 06422
    860-951-6573
    mikediv@comcast.net

    ·
  • Bill HenningBill Henning Posts: 6,445
    edited 2009-08-03 22:46
    Hi Mike,

    Sorry, I have not been getting your emails - I have no idea why. You can always email me at " mikronauts _at_ gmail.com " (ofcourse leaving out the spaces and replacing the _at_ with @)

    Will do, and will send you an invoice with the least expensive shipping I find.

    Thanks,

    Bill
    mikediv said...
    Bill have you gotten any of my emails?? the address you sent the bill came in as 2cp motors this was my old shol and has been closed for years, can you send me the bill?? mike divicino I want to pay with credit card if thats ok with you also I just saw these new memory baord can you add 2 of them for me
    to the bill

    thanks

    so I am

    mike divicino

    59r pent rd

    durham ct 06422

    860-951-6573

    mikediv@comcast.net
    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full
    Morpheus & Mem+ Advanced dual Propeller SBC with XMM and 256 Color VGA - PCB, kit, A&T available NOW!
    www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz
    Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller
  • Bill HenningBill Henning Posts: 6,445
    edited 2009-08-05 01:47
    Hi Mike,

    I hope you got my last email, I also PM'd it to you here. I only take Paypal however Paypal will let you pay with a credit card.

    Thanks,

    Bill

    p.s.

    Sorry guys for posting this here - Mike and I have some email issues between his ISP and my Gmail address.
    mikediv said...
    Bill have you gotten any of my emails?? the address you sent the bill came in as 2cp motors this was my old shol and has been closed for years, can you send me the bill?? mike divicino I want to pay with credit card if thats ok with you also I just saw these new memory baord can you add 2 of them for me
    to the bill

    thanks

    so I am

    mike divicino

    59r pent rd

    durham ct 06422

    860-951-6573

    mikediv@comcast.net
    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full
    Morpheus & Mem+ Advanced dual Propeller SBC with XMM and 256 Color VGA - PCB, kit, A&T available NOW!
    www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz
    Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller
Sign In or Register to comment.