Aluminium Extrusion (Parallax)

Cluso99

@Ken: Where can I find more details about the extrusion referred to in this thread
http://forums.parallax.com/showthread.php?p=812333

I know it takes pcbs 1.35" wide.

How wide is it between the inner ledges of the extrusion so I know how far from the pcb edge the tracks must be?
What is the overall width, height and hole placement and size? (so I can make pcb endplates)
I understand the pcbs can be stacked in multiples of 1/8" - is this correct?

This might be just what I am looking for

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBladeProp, RamBlade, TwinBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: Micros eg Altair, and Terminals eg VT100 (Index) ZiCog (Z80), MoCog (6809)
· Search the Propeller forums (via Google)
My cruising website is: ·www.bluemagic.biz·· MultiBladeProp is: www.bluemagic.biz/cluso.htm

dandreae

The measurement between the inner ledges (thinkness of the groove)·is .079".· Your end cap should be 1.5" X 1.5".· There are 9 slots for PCBs which can be stacked.· I hope this helps, let me know if you have any more questions?



Dave



▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Dave Andreae

Parallax Tech Support·

Phil Pilgrim (PhiPi)

Cluso99,

Here are the dimensions you need:



The end panel attachment holes should be sized for a #8 screw.

-Phil

Post Edited (Phil Pilgrim (PhiPi)) : 7/22/2009 8:28:28 PM GMT