Shop OBEX P1 Docs P2 Docs Learn Events
Novice with basic stamp and pbasic — Parallax Forums

Novice with basic stamp and pbasic

MARK123MARK123 Posts: 1
edited 2009-07-09 22:26 in Accessories
Novice with basic stamp and pbasic. Looking for help with code and schematic for [url=mailto:BS@PX]BS2PX[/url]·and a/d 0834. I have 3 analog voltages to display in stamp plot pro. The voltages are coming from light sensors with op-amp built into the sensor.

Post Edited By Moderator (Joshua Donelson (Parallax)) : 10/23/2009 4:57:06 AM GMT

Comments

  • Mike GreenMike Green Posts: 23,101
    edited 2009-07-09 22:26
    1) Add a subject to your thread. Go to your first message and click on the pen icon.

    2) Download the "Basic Analog and Digital" tutorial. Go to the main Parallax webpage and click on the "Resources" tab, then, in the list presented, click on "Downloads", then, in the next list, choose "Stamps in Class Downloads".

    Parallax's tutorials are written for the BS2. Each Stamp model has possibly different timing constants that have to be used. There's a supplement for the BS2px that gives all the constants for that Stamp. Go to the Parallax store webpage for the BS2px and you'll see a link to the supplement documentation.

    The StampWorks Manual also will be helpful as well as the Nuts and Volts Columns (off the "Resources" tab).

    Make sure you have a datasheet for the ADC0834.


    Post Edited (Mike Green) : 7/9/2009 10:33:39 PM GMT
Sign In or Register to comment.