Shop OBEX P1 Docs P2 Docs Learn Events
Convert hydra tv out to demo board tv out? — Parallax Forums

Convert hydra tv out to demo board tv out?

ProcessingData...ProcessingData... Posts: 208
edited 2009-07-03 14:38 in Propeller 1
Can I convert a program for the hydra using tv_drv_010.spin to run on a demo board? I've changed all the pins for the keyboard and mouse, but I can't seem to find the pin declaration for the tv out.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Basic Stamp,···· Propeller,·· · SX,·· FUN!


START:·
>Proccessing Data. . . .··
>Task Complete. . .·.
>Saving Data. . . .
>Entering SLEEP Mode. . . .
>Signing OFF


·

Comments

  • kuronekokuroneko Posts: 3,623
    edited 2009-07-03 01:48
    ProcessingData... said...
    Can I convert a program for the hydra using tv_drv_010.spin to run on a demo board? I've changed all the pins for the keyboard and mouse, but I can't seem to find the pin declaration for the tv out.
    I'm not entirely sure you can use the same kbd/mouse drivers (h/w is slightly different). As for TV, the one delivered with the Hydra is tailored, so replacing it with the demo board version (i.e. TV.spin) should do the trick (see also this thread).
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2009-07-03 01:51
    Your making it too hard on yourself.. [noparse]:)[/noparse]

    Substitute with the TV.spin file that comes with Propellertool. Should work perfectly.

    (kuroneko beat me! What he said.. [noparse]:)[/noparse]

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Visit the: The Propeller Pages @ Warranty Void.
  • ProcessingData...ProcessingData... Posts: 208
    edited 2009-07-03 03:12
    Okay, thanks I'll try it.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Basic Stamp,···· Propeller,·· · SX,·· FUN!


    START:·
    >Proccessing Data. . . .··
    >Task Complete. . .·.
    >Saving Data. . . .
    >Entering SLEEP Mode. . . .
    >Signing OFF


    ·
  • ProcessingData...ProcessingData... Posts: 208
    edited 2009-07-03 03:38
    Okay, I got it to display somthing, although it's not quite what I wanted. Now there are scrolling white lines going up the tv screen. Am I missing somthing?-- ProccessingData...

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Basic Stamp,···· Propeller,·· · SX,·· FUN!


    START:·
    >Proccessing Data. . . .··
    >Task Complete. . .·.
    >Saving Data. . . .
    >Entering SLEEP Mode. . . .
    >Signing OFF


    ·
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2009-07-03 14:38
    Make sure that you have your speed settings right.
    Hydra uses 10mhz xtal, while most demoboard/protoboard configs use 5mhz.

    I got some of this behavior myself when I was attempting to
    run the hydra lander using the 6.25mhz crystal, but I thought
    I'd have you double check the above.

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Visit the: The Propeller Pages @ Warranty Void.
Sign In or Register to comment.