Shop OBEX P1 Docs P2 Docs Learn Events
prop clip — Parallax Forums

prop clip

mctriviamctrivia Posts: 3,772
edited 2009-06-08 03:15 in Propeller 1
what is the footprint for the propclip? Anyone have a library file for eagle?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are now in stock. Only $30. PCB available for $5

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Comments

  • kwinnkwinn Posts: 8,697
    edited 2009-06-08 02:17
    The pads are on 0.1 inch centers the center of the pads are 0.1 inches from the edge of the board.
  • Erik FriesenErik Friesen Posts: 1,071
    edited 2009-06-08 02:26
    Don't know if this file will import to eagle or not, but here is mine. You pop it on the edge of the board. If you can figure it out, it would be nice to have a routed inset to align the propclip to the pads. I got tired of my clip and soldered on a female header so I can use a header or pads.
    gbr
    gbr
    propclip pads.gbr
    348B
  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2009-06-08 03:15
    The problem could be remedied easily by using slightly undersized mating holes and not filling them with solder. The Pro Clip would lock in place and not come off until you want it to. As it is they slip off the target board way too easily. I, too, have replaced the pogo pins with a header socket, turning it into a Prop Plug.

    -Phil
Sign In or Register to comment.