BS2p24/40 demo Board Schematic

bob kruggel

I have a BS2p24/40 Demo Board but· can't find any documentation for it. If anyone can send me a schematic·or tell me where to get one, I would be very pleased. I·wrote a·note·on the board that says "ENABLE=P0", so I could use help remembering what the note means if you have any info in your documentation that would help.
Thanks ahead of time,
Bob Kruggel

GWJax

The only thing I could find is the Professional Developing Board Rev. D all schematics and documentation is here:
www.parallax.com/Store/Microcontrollers/BASICStampDevelopmentBoards/tabid/137/CategoryID/12/List/0/SortField/0/Level/a/ProductID/123/Default.aspx

Hope this helps

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
If a robot has a screw then it must be romoved and hacked into..

bob kruggel

GWJax,
Thanks, but the wrong board.
Bob Kruggel

Zoot

Not sure if this stuff is still posted at Parallax.com, but here are my downloaded versions (great board, btw):

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
When the going gets weird, the weird turn pro. -- HST

1uffakind.com/robots/povBitMapBuilder.php
1uffakind.com/robots/resistorLadder.php

Chris Savage

Bob, enabling the jumper on the board causes a pull-down resistor to be enabled on P0 which is used when connecting a parallel LCD. Take care.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Engineering

bob kruggel

Chris and Zoot.
Got the schematic and Chris' comment about ENABLE.
BobK