Propeller based demo to be released at Breakpoint.
Linus Akesson
Posts: 22
Hi!
Just wanted to give you all a heads-up, that I will be releasing a new microcontroller demo at this year's Breakpoint (during the Easter weekend). It's based on the propeller and compatible with the propeller demo board. It uses VGA for graphics, and I do believe that I've invented some new techniques that push the boundaries of what the propeller can do.
I'll post the .eeprom file here as soon as the demo party is over, but I won't release the source code until somebody figures out some of the tricks I used, because I think it will be a fun reverse engineering challenge.
That's all for now...
Just wanted to give you all a heads-up, that I will be releasing a new microcontroller demo at this year's Breakpoint (during the Easter weekend). It's based on the propeller and compatible with the propeller demo board. It uses VGA for graphics, and I do believe that I've invented some new techniques that push the boundaries of what the propeller can do.
I'll post the .eeprom file here as soon as the demo party is over, but I won't release the source code until somebody figures out some of the tricks I used, because I think it will be a fun reverse engineering challenge.
That's all for now...
Comments
Looking forward to that [noparse]:)[/noparse] Lucky we have disassemblers!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Cardinal Fang! Fetch the comfy chair.
So do I! I'm so curious... And I'll take the challenge - if it's worth the effort.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Airspace V - international hangar flying!
www.airspace-v.com/ggadgets for tools & toys
hooo woow ! very BIG smile on my face
Most of the time I don't use smilies here I do
I'm so curious about it ! It's almost like if I were a child and couldn't wait anymore for the "eastern rabbit"
to hide the eggs and presents in the garden
I almost need some tranquilizers to get down on a normal level again
looking forward to what it will be
best regards
Stefan
Post Edited (StefanL38) : 4/5/2009 12:11:17 PM GMT
I've been patiently waiting for you to reappear with some Propeller magic. I knew you would.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
For me, the past is not over yet.
A reason to look forward to Easter! Looking forward to seeing the demo. Breakpoint and other demo scene party stuff is something I look forward to every year. Just when you think you've seen it all from a particular bit of hardware, somebody goes and does something. It is just great to see a Propeller there.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
I'm so happy that there will be a Propeller based demo at Breakpoint!!
We all know there is noone better to deliver it than you.
This will show people what the prop can do, I bet sales will rise after this release + the $7.99 price!!
Does it have Audio also?
Just in case folks haven't seen this yet, here is the one he did with an AVR:
http://www.linusakesson.net/scene/craft/
Rick
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PropGFX - The home of the Hybrid Development System and PropGFX Lite
[noparse]:)[/noparse]
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
See it here first!
If their time is Germany time, then the Wild Compo begins at 10:00 PST, otherwise it's probably noon, PST.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
Post Edited (potatohead) : 4/12/2009 6:33:17 AM GMT
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite
·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
For me, the past is not over yet.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite
·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite
·
Edit: It is about streaming music.
At 19:00 hs is the real wild, so at that time we will find out!
Post Edited (Ale) : 4/12/2009 1:45:52 PM GMT
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite
·
Happy Easter! to all that celebrate
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Aka: CosmicBob
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
For me, the past is not over yet.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
For me, the past is not over yet.
I had a short look in the website of linus
his CRAFT-demo was in the category "Console/Real Wild"
the timetable says this competetion starts at 19:00 MET
15 Minutes ahead from the timestamp of this posting
cheers
Stefan
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PropGFX - The home of the Hybrid Development System and PropGFX Lite
Jim
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
Well The C64 demos are done, now we have to wait till 8 for the real wild and console :-(. I was hoping it was gonna be at 7!
Now if I can just persuade the wife...........
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PropGFX - The home of the Hybrid Development System and PropGFX Lite
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Wiki: Share the coolness!
Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
Safety Tip: Life is as good as YOU think it is!