TriBlade - Single Board Computer RUNNING - 3x Propeller ICs and SRAM

TAGalex

······My·· SMD Clone·· "TriBladeProp "

Post Edited (TAGalex) : 3/18/2010 2:55:28 AM GMT

Cluso99

TAGalex: Please do not call your board "TriBladeProp". You may call it a "TriBladeProp Clone" if you wish.

Did you do the OE modification to the srams on blade #2?

The board looks quite nice although a power plane might be nice. What is the size?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBlade,·RamBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: CPUs Z80 etc; Micros Altair etc;· Terminals·VT100 etc; (Index) ZiCog (Z80) , MoCog (6809)·
· Prop OS: SphinxOS·, PropDos , PropCmd··· Search the Propeller forums·(uses advanced Google search)
My cruising website is: ·www.bluemagic.biz·· MultiBlade Props: www.cluso.bluemagic.biz

TAGalex

Thanks Cluso99!!!
This board calls "TriBladeProp Clone"

I didn't do the OE modification

It's size: 160 mm·x 120 mm

Post Edited (TAGalex) : 3/16/2010 9:08:23 PM GMT

TAGalex

SMD Clone "TriBladeProp"
OE modification to the srams on blade #2

Post Edited (TAGalex) : 3/20/2010 2:38:19 AM GMT

TAGalex

SMD Clone "TriBladeProp" it's running

Cluso99

Congratulations!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBlade,·RamBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: CPUs Z80 etc; Micros Altair etc;· Terminals·VT100 etc; (Index) ZiCog (Z80) , MoCog (6809)·
· Prop OS: SphinxOS·, PropDos , PropCmd··· Search the Propeller forums·(uses advanced Google search)
My cruising website is: ·www.bluemagic.biz·· MultiBlade Props: www.cluso.bluemagic.biz

pullmoll

TAGalex said...
SMD Clone "TriBladeProp" it's running

Cool! I wish I had one [noparse];)[/noparse] Do you solder the parts yourself? I guess that would be killing me.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
He died at the console of hunger and thirst.
Next day he was buried. Face down, nine edge first.

Cluso99

The real TriBlade was through hole except for the microSD socket and FT232RL USB chip.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBlade,·RamBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: CPUs Z80 etc; Micros Altair etc;· Terminals·VT100 etc; (Index) ZiCog (Z80) , MoCog (6809)·
· Prop OS: SphinxOS·, PropDos , PropCmd··· Search the Propeller forums·(uses advanced Google search)
My cruising website is: ·www.bluemagic.biz·· MultiBlade Props: www.cluso.bluemagic.biz

Toby Seckshund

I wish I could do through hole plating, I'll have to go for an iron upgrade.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Style and grace : Nil point

Omikron

it seems to have some extra components compared to classic TriBlade

Cluso99

Toby: Maybe you could get a MEMS iron and you could iron from inside the hole with it. LOL, but not too loudly as it may be possible sooner than you think!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBlade,·RamBlade,·SixBlade, website
· Single Board Computer:·3 Propeller ICs·and a·TriBladeProp board (ZiCog Z80 Emulator)
· Prop Tools under Development or Completed (Index)
· Emulators: CPUs Z80 etc; Micros Altair etc;· Terminals·VT100 etc; (Index) ZiCog (Z80) , MoCog (6809)·
· Prop OS: SphinxOS·, PropDos , PropCmd··· Search the Propeller forums·(uses advanced Google search)
My cruising website is: ·www.bluemagic.biz·· MultiBlade Props: www.cluso.bluemagic.biz