BS 2 Interpreter Chip
I want to integtate the BS 2 Interpreter chip to my circuit board (PBASIC2C/P
I do not have a pin out list to compare it with the BS2-IC Module that I am presently using.
I need to know where pin 0 to pin15 are.
Where can I get that information?
Rino
I do not have a pin out list to compare it with the BS2-IC Module that I am presently using.
I need to know where pin 0 to pin15 are.
Where can I get that information?
Rino
Comments
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·"If you build it, they will come."
Rino
·http://www.parallax.com/Portals/0/Downloads/docs/prod/schem/bs2oem.pdf
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·"If you build it, they will come."
In the schematic we have RA0 to RA3 then RB0 to RB7, then RC0 To RC7. Where are I/O pins 0 to 15?
Thanks
Rino
Pin 20 on connector X1 is Vdd, corresponds to pin 2 on your interpreter chip.
Pin 19 on X1 is Vss, pin·4 on your interpreter chip
RB0=P0
RB1=P1
...
RB7=P7
RC0=P8
RC1=P9
RC2=P10
...
RC7=P15
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·"If you build it, they will come."
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Rick
Rino