Shop OBEX P1 Docs P2 Docs Learn Events
DIY proto board - Page 2 — Parallax Forums

DIY proto board

2»

Comments

  • AleAle Posts: 2,363
    edited 2009-01-20 19:04
    I'm not frustrated with Eagle. But I should admit that it took me may hours to learn it, many. I needed to do the boards, or so I believed. In the end I had to drop the project but the experience served me well.
  • LeonLeon Posts: 7,620
    edited 2009-01-20 22:38
    I've just assembled most of my board and performed an initial test - the Propeller is recognised by the Propeller Tool. I couldn't find my 100 nF capacitors, so I didn't have any decoupling. I've just found them on the floor where the cat left them.

    Leon

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Amateur radio callsign: G1HSM
    Suzuki SV1000S motorcycle
  • Mark SwannMark Swann Posts: 124
    edited 2009-01-21 18:50
    @ mynet43,

    I have some more diptrace questions, but instead of continueing hijacking Leons thread, I will move my questions to the Sandbox. I will post my questions after work.

    Mark
  • LeonLeon Posts: 7,620
    edited 2009-01-21 19:19
    The board has now been completed and everything works, including the EEPROM. I'll put all the files together, upload them to my web site and mention it on Completed Projects.

    Leon

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Amateur radio callsign: G1HSM
    Suzuki SV1000S motorcycle
  • Mark SwannMark Swann Posts: 124
    edited 2009-01-21 21:34
    Leon said...
    The board has now been completed and everything works, including the EEPROM. I'll put all the files together, upload them to my web site and mention it on Completed Projects.

    Leon

    Thanks. I will be looking forward to seeing what you did.
  • mynet43mynet43 Posts: 644
    edited 2009-01-22 01:59
    @ Mark,

    Feel free to send questions to the SandBox re DipTrace.

    There's a DipTrace thread there now.

    Or you can send me a PM if that's easier.

    Jim
Sign In or Register to comment.