Alright, last post. I made the final prototypetoday and it works great. Everything is functional, so I've sent in my order to futurlec.com. I've ordered 35 boards with soldermask to make soldering easier. Right now, I've got orders for 27 of these, so once their gone, their gone. Here are a few pictures of the schematic, and the actual board. The prototype has the female header soldered in, but a male header can be put in instead for plugging into a breadboard. The board is only missing Audio capacitors and the resistor, plus some headers for 5V and Vin access. The final board dimensions are 2" x 3.5". From now on, please do any replying in the sandbox with the thread here:
Phil: I missed this on the forum - I dont usually check the sandbox. (I was sure this was in the sandbox when I posted the reply - Am I having a senior moment )
A suggestion (if you design another pcb for the prop)... TV and VGA.
It is unlikely that people will require both, so I have used the same 4 lower pins for VGA and TV. If you have space, then 2 sets of resistors fitted to both the vga and TV and 4x3 links will select either vga or tv, so you can have both options, just not simultaneously.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ Links to other interesting threads:
I sent a private message 2/19/2009 2:00 PM but did not get an answer therefore I left you a message on your other post[noparse]:([/noparse] Posted 2/21/2009 8:44 AM (GMT -4) ) Still no answer so I thought I'd try this post.
Comments
http://forums.parallax.com/showthread.php?p=774075
Cody Lewis
Escondido, CA
???
A suggestion (if you design another pcb for the prop)... TV and VGA.
It is unlikely that people will require both, so I have used the same 4 lower pins for VGA and TV. If you have space, then 2 sets of resistors fitted to both the vga and TV and 4x3 links will select either vga or tv, so you can have both options, just not simultaneously.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:
· Home of the MultiBladeProps (SixBladeProp)
· Prop Tools under Development or Completed (Index)
· Emulators (Micros eg Altair, and Terminals eg VT100) - index
· Search the Propeller forums (via Google)
My cruising website is: ·www.bluemagic.biz
Post Edited (Cluso99) : 2/21/2009 3:02:10 PM GMT
I sent a private message 2/19/2009 2:00 PM but did not get an answer therefore I left you a message on your other post[noparse]:([/noparse] Posted 2/21/2009 8:44 AM (GMT -4) ) Still no answer so I thought I'd try this post.
http://forums.parallax.com/showthread.php?p=774075
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Aka: CosmicBob