using a basic stamp with multiple sensirion sht11 sensors

subzero

im doing a project thats basically has to use a single wire signal path
but my question is can you share the data in line on the sht11 humidity and temperture sensor.using the same pin on the basic stamp .so i could have 2 sensors in line?

thanks for any in advance
·

Tracy Allen

There is no provision for multiple devices on the same lines. They are not I2C. You can use the same clock line for both, but you'll have to use different data lines for each one. If you want multidrop, you'll have a lot more work to add some intelligence along with each sensor node.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Tracy Allen
www.emesystems.com