Shop OBEX P1 Docs P2 Docs Learn Events
I got a blackout ;) — Parallax Forums

I got a blackout ;)

port513port513 Posts: 50
edited 2008-09-04 17:15 in Propeller 1
I have an embarrassing question

I just got a new PPDB, how do I wire the board so I can get one LED to blink?

Lets say I want P0 to blink led 0, how do I wire that?


/Henke

Comments

  • ElectricAyeElectricAye Posts: 4,561
    edited 2008-09-04 16:55
    Port,
    go to http://www.parallax.com/tabid/442/Default.aspx
    and download the Education labs, especially the set up and I/O labs. They tell you how to do a lot.

    good luck,
    Mark

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    It might be the Information Age but the Eon of Ignorance has yet to end.
  • Paul BakerPaul Baker Posts: 6,351
    edited 2008-09-04 16:57
    No Problem, connect a wire from P16 on the Propeller to any one of the LEDs on the right hand side of your board. Then load (Ch3-Ex01)-Output.spin in Examples/Manual of your Tool.

    For P0 blinking, connect the wire to P0 and change the occurances of 16 in (Ch3-Ex01)-Output.spin to 0.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Paul Baker
    Propeller Applications Engineer

    Parallax, Inc.
  • port513port513 Posts: 50
    edited 2008-09-04 17:15
    As I said, embarrassing [noparse];)[/noparse]

    I have to short jumpers and tried to connect them with the breadboard and forgott how the rails are arranged [noparse];)[/noparse]


    /Henke
Sign In or Register to comment.