Shop OBEX P1 Docs P2 Docs Learn Events
help !!! i need the firmware for the interpreter chip — Parallax Forums

help !!! i need the firmware for the interpreter chip

delpy93delpy93 Posts: 3
edited 2008-09-01 04:09 in BASIC Stamp
hello tongue.gif I need the firmware pbasic for PIC16C57C
to youse the program BASIC STAMP EDITOR V1.33



··········· thanks

Comments

  • Mike GreenMike Green Posts: 23,101
    edited 2008-08-30 20:25
    It is not available. Parallax will sell you a pre-programmed PIC16C57 for about $12.
    Parallax makes a lot of information and software available for free, but not the PBasic
    interpreter, not the source of the editor nor the documentation for the interpretive code.

    Post Edited (Mike Green) : 8/30/2008 8:30:50 PM GMT
  • delpy93delpy93 Posts: 3
    edited 2008-08-31 07:04
    thank you !!!!

    sorry...I wrote a new similar topic...
  • delpy93delpy93 Posts: 3
    edited 2008-08-31 07:05
    to program the pic I can use a compiler?
  • FranklinFranklin Posts: 4,747
    edited 2008-08-31 14:44
    You can use any device/program that is used on other pic chips. You just won"t have a Basic Stamp

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    - Stephen
  • Mike GreenMike Green Posts: 23,101
    edited 2008-08-31 15:04
    Microengineering Labs sells a PICBASIC compiler. The regular version is comparable to the BS1 in terms of things it can do and the Pro version is comparable to the BS2. I have a copy and have used it in the past for projects where a Stamp couldn't be used (because of size, cost, number of pins, speed, etc.) As Franklin indicated, it's not the same as a Basic Stamp, but it's a well done mature product.
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2008-09-01 04:09
    Your duplicate post was removed.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Engineering
Sign In or Register to comment.