Shop OBEX P1 Docs P2 Docs Learn Events
srf04sonic sensor — Parallax Forums

srf04sonic sensor

James parksJames parks Posts: 5
edited 2008-09-17 03:08 in Robotics
please could some one help me iam new to robotics and electronics ,
i need help with wirind coding so i can get my boe-bot roaming with the srf04 sensor

········· please please help


······ james parks
·

Comments

  • FranklinFranklin Posts: 4,747
    edited 2008-08-28 01:07
    Check out the roaming with ping code and read the srf04 data sheet as to how it hooks up. The ping uses one pin for both in and out where the srf04, if I remember right uses two, an in and an out.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    - Stephen
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2008-08-28 03:03
    Your duplicate posts were removed. Please post messages of a subject only once. It is not polite to hijack someone else's thread.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Engineering
  • JDJD Posts: 570
    edited 2008-08-29 19:38
    James,

    There is readily available documentation for this product and the interface with the BS2 from the following web site. There is not a header on the module like there is the PING)));·so you will have to solder the connections on the module to the board as well.

    You can download the manual with the link below that has sample code also.
    http://www.acroname.com/robotics/parts/R93-SRF04p.pdf

    I hope this help

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Joshua Donelson

    www.parallax.com
  • James parksJames parks Posts: 5
    edited 2008-09-16 10:15
    Need help again I want a code to scan a servo


    kind regards james
  • FranklinFranklin Posts: 4,747
    edited 2008-09-17 03:08
    Read 'what's a microcontroller' and the boebot manual both available from the Parallax site.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    - Stephen
Sign In or Register to comment.