Gridrunner 1.0.

Bamse

Finally version 1.0...
Dedicated to Baggers for cheering me on this six month project...

This is not supposed to be an exact remake but I think I came pretty close to the original.
If you think you can do better sound effects, please let me know and we'll put them in there.

Have fun and let me know what you think...

Updated 6/23...
Added the VCFG pingroup to the parameters passed to the Video Driver...
Also added the Dummy file from OBC for those who don't have the Hydra sound driver...
Added the ComboKeyboard from Mike Green for keyboard support.
Fixed bug in Video driver.

Updated 6/24...
Added Coleys functionality to detect hardware...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
[noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[noparse][[/noparse] ] I dream in SX28 assembler...

/Bamse

Post Edited (Bamse) : 6/25/2008 2:53:14 AM GMT

AndreL

Bamse, and everyone for that matter make sure to add links to the HYDRA wiki with your games as well, so when people search and find HYDRA they get to see your games as well, the parallax forums only represent a small percentage of HYDRA owners and propeller people in general, so make sure you don't only post the games on here, post them in all HYDRA, Propeller dwellings, so the world can see your work [noparse]:)[/noparse]

Andre'

Baggers

Bamse, thanks, fantastic work, and thanks for the dedication [noparse]:)[/noparse] and yes, it's unbelievably close to the original [noparse]:)[/noparse] and again, well done doing such a fine replication!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite

·

Bamse

Added the VCFG pingroup to the parameters passed to the Video Driver...

I'm going to dig out the Hydra book and see if I can add keyboard support that works on the Demo/Protoboard so that these guys can enjoy it as well...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
[noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[noparse][[/noparse] ] I dream in SX28 assembler...

/Bamse

JT Cook

Mike Green made a keyboard driver that supports both the Hydra and proto/demo boards. I also have it in my Spintris game.

Bamse

Got it, looks like the keyboard works now...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
[noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[noparse][[/noparse] ] I dream in SX28 assembler...

/Bamse

Coley

Bamse,

Excellent work, The YAK would love this!!!!

Why don't you add support for setting the pin group and clockspeed at runtime?
I've written a little routine that can check for Hybrid, Hydra or Demoboards.

Regards,

Coley

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PropGFX Forums - The home of the Hybrid Development System and PropGFX Lite

Bamse

Thanks Coley...

I just posted a new version that uses your functionality...
Can you give it a try on the Hybrid when you have a chance ?
Try the eeprom file first and let me know how it works...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
[noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[noparse][[/noparse] ] I dream in SX28 assembler...

/Bamse

Baggers

Bamse, it works fine on hybrid matey [noparse]:)[/noparse]

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite

·

Clemens

perfect on the demoboard, too.

Thanks

Bamse

Thanks for checking the Hybrid and Demo board...

I'm pretty amazed that we got the eeprom file to work on all three platforms...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
[noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[noparse][[/noparse] ] I dream in SX28 assembler...

/Bamse

Baggers

Yeah, pretty cool, and for such a small overhead too [noparse];)[/noparse]

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite

·

Paul Baker

Oops, just found this thread, master index repointed to this thread.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Paul Baker
Propeller Applications Engineer

Parallax, Inc.