Shop OBEX P1 Docs P2 Docs Learn Events
RFID Reader Module and Tag Sampler Kit — Parallax Forums

RFID Reader Module and Tag Sampler Kit

cramirezgalviscramirezgalvis Posts: 1
edited 2008-04-22 17:43 in BASIC Stamp
im workinh with a reader HF ref··RFID Reader Module· wich have 4 pins:

Enable
SOUT
VCC
GND

my problem is when conect the enable (GND), the reader have problems with the systrem, hot the supply and reset the microcontrolador.

can you help me?

roll.gif·

Comments

  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2008-04-22 17:18
    This post is being moved from the Forum Support area to the BASIC Stamp Forum.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
  • Mike GreenMike Green Posts: 23,101
    edited 2008-04-22 17:43
    You will have to describe what you are trying to do and exactly how you have the reader connected. You will have to describe what sort of problems you are having. The reader works fine when it is hooked up as described in the documentation. Perhaps your power supply is not working properly or perhaps it can't supply enough current for the RFID reader. When it is active, the RFID reader uses about 90mA.
Sign In or Register to comment.