Shop OBEX P1 Docs P2 Docs Learn Events
Emic TTS to BS2sx Problem — Parallax Forums

Emic TTS to BS2sx Problem

NoumenonNoumenon Posts: 4
edited 2008-04-01 23:34 in BASIC Stamp
Hey guys I just got my Emic Text to Speech module from you guys and I connected it to my BASIC Stamp BS2sx, I used one of the sample codes you guys provided from your page and it doesnt seem to respond. I think the problem lies in the busy pin of the module which doesnt change to high when I send the command to change it to high. Anyway any help to resolve this matter would be greatly appreciated, thanks jumpin.gif

Comments

  • Mike GreenMike Green Posts: 23,101
    edited 2008-04-01 22:54
    Remember that the SERIN / SEROUT statements need a different Baud mode constant for the BS2sx than the BS2. Look in the PBasic Manual for details.
  • NoumenonNoumenon Posts: 4
    edited 2008-04-01 23:22
    Thanks for the tip man ill check the baud rates and get back to you if it works.
  • NoumenonNoumenon Posts: 4
    edited 2008-04-01 23:34
    It didn't work I checked the baud rates tables in the manual and the value for the BS2sx for a baud rate of 2400 is 1021 which is what I originally had written in the code. This is so frustrating I don't know what else to do sad.gif
Sign In or Register to comment.