BS2e Rev D Module (Non-Industrial) specifications/documentation?

Kd7lax

Hey all,
I purchased a couple of the BS2e Rev D modules in the blowout sale (what a deal!), but I don't remember what was different about the specs for the discounted version and cannot find documentation now that the ad has been taken down. I was just wondering if any one remembered what (if anything) was different? I think it was the temperature specifications but then again I don't remember [noparse]:)[/noparse]

Thanks in advanced for replies!

-Mike

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Visit my website @ www.kd7lax.com- Devoted to ham radio

erco

Same specs as the BS2e, only difference is the temperature range. See http://www.parallax.com/Store/Microcontrollers/BASICStampModules/tabid/134/CategoryID/9/List/0/SortField/0/Level/a/ProductID/2/Default.aspx

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
·"If you build it, they will come."

Tracy Allen

The Rev e uses an external brownout detector instead of the one that is built into the SX processor. The one built into the SX processor set at 4.6 volts was used in earlier revisions, but could cause a lockup at low temperatures, below -10 or -20 deg. Celsius. The industrial temperature range extends down to -40 deg. Celsius.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Tracy Allen
www.emesystems.com

Kd7lax

Cool thanks for the info.

-Mike

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Visit my website @ www.kd7lax.com- Devoted to ham radio