Shop OBEX P1 Docs P2 Docs Learn Events
Propeller Proto Board Item code 32212 Question — Parallax Forums

Propeller Proto Board Item code 32212 Question

Mike CookMike Cook Posts: 829
edited 2008-01-19 22:17 in Propeller 1

Probably a dumb question but here it goes...................

Has anyone been successful on cutting out the 'Propeller Core' from the Propeller Proto Board? Looks like it would make a neat module to have, to insert into a larger project board. Looks like if you did it you would have to tap the 'reset switch' for the RES line so you can program it.

Just a thought, probably stupid! SMT challenged.



attachment.php?attachmentid=51550

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Mike

Post Edited (Mike Cook) : 1/19/2008 5:49:29 PM GMT
_PCORE.JPG
399 x 400 - 43K

Comments

  • ClemensClemens Posts: 236
    edited 2008-01-19 17:54
    Hi Mike I just did that last week. The only critical part is that you don't have easy access to "reset". You need that for the propplug. But you can scrape off the isolation on the board at one place and solder on a contact.
    I will post a picture smile.gif

    Clemens
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 18:00

    Yup that was what I was thinking. In the lower coroner near P31 there's a blank pad that you could run a 'mag wire' for RES.

    Wish it would warm up, might have to fire up the band saw! Looking forward to seeing your picture!

    Thanks!

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike
  • ClemensClemens Posts: 236
    edited 2008-01-19 18:26
    Here is a picture of my Protoboard "Nano" ;-)
    The left side is absolute nonsense off course...
    Didn't want to throw anything away.
    It's a ground floor for power supply and access.

    propcube1.jpg


    propcube2.jpg

    Yes!, I bought myself a proxxon (something like a dremel) for christmas.
    http://www.proxxon.com/us/
    And I have the drillstand and the compound table, too!

    Cheers,

    Clemens
    ·
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 18:29
    SWEET!

    Let's just say that probably VOIDS the WARRANTY!

    Time to fire up the power tools..............





    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2008-01-19 18:36
    Any chance we could get it to fit into one of those PDA keyboards a bunch of us ordered?

    Heh!

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)
  • ClemensClemens Posts: 236
    edited 2008-01-19 18:43
    Oh, and did I mention, it was inspired by the propeller cookbook off course:
    http://forums.parallax.com/showthread.php?p=665736
    Those links can't be posted often enough ;-)

    propcube3.jpg
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 18:45
    oooH.......

    Cram in a miniSD card socket + 3 resistors, then get Mike Green to modify FemtoBasic and then you would have a modern day Timex Sinclair 1000, in a 3.5" x 3.5" form factor!

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2008-01-19 18:53
    @Clemens: Thanks for the kudos!

    @Mike:

    <AUSTINPOWERS>Yeah Baby!</AUSTINPOWERS>
    Any chance you've cracked one of those keyboards open and found a "little" space?
    Might have to shave the board down just a bit more?

    (Here's a modified Femto that should fill the bill..)
    69.68.32.81/propeller/FemtoBasic_COLOR_NOV17-2007.zip

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)

    Post Edited (Oldbitcollector) : 1/19/2008 6:58:13 PM GMT
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2008-01-19 19:00
    @Clemens:

    Another wonderful way to void the warranty!! Love it!

    Do you mind if I include your photos and material in the next release of the Cookbook I'm working on?
    (With proper credit to you of course!)

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 19:04
    Looks like their's only three wires going to the Palm connector, +3.3, data out, and gnd. Pretty tight on the bottom cover, might be able to fit a 'core' module in there.


    @ OBC - <AUSTINPOWERS>Yeah Baby!</AUSTINPOWERS>

    LOL - NEED AN AUDIO CLIP OF THAT!

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike

    Post Edited (Mike Cook) : 1/19/2008 10:42:49 PM GMT
    100_1119.jpg
    1088 x 907 - 347K
    100_1120.jpg
    1477 x 636 - 356K
  • ClemensClemens Posts: 236
    edited 2008-01-19 19:09
    I'd be honoured. smile.gif
  • James LongJames Long Posts: 1,181
    edited 2008-01-19 19:11
    Mike·said...
    Probably a dumb question but here it goes...................

    Has anyone been successful on cutting out the 'Propeller Core' from the Propeller Proto Board? Looks like it would make a neat module to have, to insert into a larger project board. Looks like if you did it you would have to tap the 'reset switch' for the RES line so you can program it.

    Just a thought, probably stupid! SMT challenged.

    Wow,

    Not to hijack the thread, but that is why I'm starting a SMT assembly service.

    I hope some of the SMT challenged people consider it.

    James L


    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    James L

    Partner/Designer
    Lil Brother LLC (SMT Assembly Services)
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2008-01-19 19:11
    If you can get the 'core' to fit in there, here's an option for the screen...
    (Hey why not use everything?! Heh!)

    palmorb.sourceforge.net/

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 19:34
    @James

    If I use your SMT assembly service will you design the board for me for FREE? I'm very ADD and would like to make many changes during the process!

    Just kidding.··tongue.gif· I·have no problems drawing boards, but in the last few years I've had to purchase several magnifying aids!

    If I ever get to the point where I need SMT assembly services, then you are 'bookmarked'!


    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike
  • James LongJames Long Posts: 1,181
    edited 2008-01-19 19:48
    Mike Cook said...

    @James

    If I use your SMT assembly service will you design the board for me for FREE? I'm very ADD and would like to make many changes during the process!

    Just kidding.··tongue.gif· I·have no problems drawing boards, but in the last few years I've had to purchase several magnifying aids!

    If I ever get to the point where I need SMT assembly services, then you are 'bookmarked'!


    Mike,

    Cool......I really have thought of hacking a board up.....but would never do it. I'm to conservative I guess.

    James L

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    James L

    Partner/Designer
    Lil Brother LLC (SMT Assembly Services)
  • Dennis FerronDennis Ferron Posts: 480
    edited 2008-01-19 20:57
    Thanks for posting this!! I had the idea to do this but I've been hesistant to cut up my protoboard because I didn't know whether I would slice any important internal layer traces that way. It's good to know that it does work.
  • BeanBean Posts: 8,129
    edited 2008-01-19 21:57
    Mike Cook said...
    Cram in a miniSD card socket + 3 resistors, then get Mike Green to modify FemtoBasic and then you would have a modern day Timex Sinclair 1000, in a 3.5" x 3.5" form factor!
    Mike you stole my idea.
    Great minds think alike. Or is that troubled minds.... Oh well.

    Bean.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    www.iElectronicDesigns.com

    ·
  • Mike CookMike Cook Posts: 829
    edited 2008-01-19 22:17

    Terry,

    Probably just demitted minds!

    All, all of us wants is a Propeller powered one of these: (TRS-80 Pocket Computer!)

    attachment.php?attachmentid=51556

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Mike
    100_1121.jpg
    1557 x 656 - 255K
Sign In or Register to comment.