Handheld Props

RaymanRayman Posts: 9,463
edited 2008-12-28 - 00:40:37 in Propeller 1
Recent talk about cutting up Proto boards gave me an idea...· Check out my cut up Proto board in a Hammond 1553 case with Nokia display.· There are side ports for PropPlug and keypad...··· I wish I'd put the screen in 180 degrees around now though (so there'd be room for a 12-key panel mount keypad...).

I put a Prop Oled in a smaller one, but somehow damaged it in the process...· The screen is extremely dim now.
Prop Info and Apps: http://www.rayslogic.com/

Comments

  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,089
    edited 2008-02-17 - 01:24:06
    Just finished mine tonight.. Or at least got it up and running..
    (When is a propeller project ever finished???)

    It slides into a 10pin female header for easy removal for work.
    Currently my SD socket is a little skitzo, but it works most of the time.
    It's fully connected to sound and the PDA keyboard you see in the shots.

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)


    816 x 616 - 80K
    816 x 616 - 94K
    816 x 616 - 76K
    816 x 616 - 60K
    <br>
  • rjo_rjo_ Posts: 1,825
    edited 2008-02-17 - 04:33:34
    That's what I call rapid prototyping[noparse]:)[/noparse]

    I think you guys just set some kind of record... somebody needs to call the Guiness people.

    Rich
  • rjo_rjo_ Posts: 1,825
    edited 2008-02-17 - 04:36:26
    Why are there wires going from the keyboard to the computer?
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,089
    edited 2008-02-17 - 13:54:28
    *wires*

    Only because I don't have the IR interface stuff installed and working yet.. [noparse]:)[/noparse]
    (Still breadboarding that part.. [noparse]:)[/noparse]

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Getting started with the Protoboard? - Propeller Cookbook
    Got an SD card? - PropDOS
    A Living Propeller FAQ - The Propeller Wiki
    (Got the Knowledge? Got a Moment? Add something today!)

    <br>
  • rjo_rjo_ Posts: 1,825
    edited 2008-02-17 - 17:32:11
    I just couldn't "resist"... [noparse]:)[/noparse]
  • AbelAbel Posts: 15
    edited 2008-02-25 - 00:20:23
    Here is my Handheld Propeller powered GPS System.·

    Front view: The all important Propeller Powered Sticker by Phil (thank you roll.gif ), a Micro DataPad Mini Keyboard for Palm PDA m100 for user input, and a uOLED-128-GMD1 display.

    Inside view:· upper left Parallax GPS reciever Module, lower left a Propeller Demo Board and on the lower right rechargable batteries.

    Screen view:·GPS Module output showing heading·and current position along with··calculated bearing and distance to destination.· only 1 cog·free for further development. confused.gif

    Thanks to all who shared their knowledge in the Almost Free Keyboard, GPS, uOLED·and Floating Point related posts.


    Post Edited (Abel) : 2/25/2008 12:55:19 PM GMT
    408 x 602 - 33K
    640 x 480 - 140K
    640 x 480 - 129K
  • mcstarmcstar Posts: 144
    edited 2008-12-27 - 23:15:56
    Does anyone have one of the Micro DataPad Mini Keyboard for Palm PDA m100 for sale? Know where I can get one?
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,089
    edited 2008-12-27 - 23:33:31
    bean should still have some, if not PM me and I'll make you the same deal
    he has.. I'm sure I still have a couple unopened units in my shop somewhere. [noparse]:)[/noparse]

    OBC

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    New to the Propeller?

    Check out: Protoboard Introduction , Propeller Cookbook 1.4 & Software Index
    Updates to the Cookbook are now posted to: Propeller.warrantyvoid.us
    Got an SD card connected? - PropDOS
    <br>
  • Cluso99Cluso99 Posts: 14,913
    edited 2008-12-28 - 00:40:37
    Very nice - thanks for sharing your pics :-)

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Prop Tools under Development or Completed (Index)
    http://forums.parallax.com/showthread.php?p=753439

    cruising][noparse][[/noparse]url=http://www.bluemagic.biz]cruising[noparse][[/noparse]/url][/url]

    This is a [noparse][[/noparse]b]bold[noparse][[/noparse]/b] test.
    My Prop boards: P8XBlade2, RamBlade, CpuBlade, TriBlade
    Prop OS (also see Sphinx, PropDos, PropCmd, Spinix)
    Website: www.clusos.com
    Prop Tools (Index) , Emulators (Index) , ZiCog (Z80)
Sign In or Register to comment.