YModem (2019 update)



  • Wuerfel_21 wrote: »
    Thanks for bumping this thread! If I can get this to work, hours of SD card swapping may be saved...

    While it works for small files, it's slow. I've got this up to about 8kbytes/s but that seems to be nearing the top speed. Still fun to play with and helpful for small files.
  • I have a prop os that includes file transfers. Details on the Prop OS thread. There is no error checking tho IIRC.
    My Prop boards: P8XBlade2 , RamBlade , CpuBlade , TriBlade
    P1 Prop OS (also see Sphinx, PropDos, PropCmd, Spinix)
    Website: www.clusos.com
    P1: Tools (Index) , Emulators (Index) , ZiCog (Z80)
    P2: Tools & Code , Tricks & Traps
  • 8 kb/s is a little poor - KyeFAT's block driver is slow, but not that slow. On the serial side, I can get 3 megabaud prop-to-PC with a few lost bytes (See JETviewer), I'd guess the other direction goes up to around 1 Mbaud.
    My projects: JET Engine - Ventilator Computer (site coming soon™) and relatedly, VentilatorOS and software archive - Turbulence NTSC - The game(no not that one) (also coming soon™)
    Other cool links: Propeller Discord - Retronitus
    Wow, I too finally have an overly long signature!
  • RaymanRayman Posts: 10,048
    edited 2019-11-12 - 15:38:52
    I'm updating this now to FSRW2.6 as the original version didn't support FAT32, apparently...
    Also, changing default pins to match Activity Board WX.

    Need arose as I have a Prop board buried in a control panel and want to add files to SD card without tearing the whole thing apart.
    Transfer speed is slow, but a lot faster overall than the alternative...

    I'll mention cheezus's version too in top post..

    Also, just tested with ExtraPutty and it works. HyperTerminal probably still works, but it was bugging me about installing a modem...
    Prop Info and Apps: http://www.rayslogic.com/
Sign In or Register to comment.