Say it Module disappearance?

kails247 · 2012-03-28 19:14

My computer is still not detecting basic stamps and I went back to the parallax site to redownload the software for the Say It Module, and I cannot find anything for it. I was able to access the information about 2-3 weeks ago and now nothing? Does anyone know if the site discontinued this module or any reason why the item and its information is not available on the site? Please let me know if you know anything. Thank you.

-Kails

Duane Degn · 2012-03-28 19:32

That is strange.

Is there something in particular you need?

I'm sure I have all the downloads on my computer. Is there something you'd like me to post?

erco · 2012-03-28 19:33

http://www.parallax.com/Portals/0/Downloads/docs/prod/comm/30080-SayItModule-v1.1.pdf

kails247 · 2012-03-28 19:33

the software required to use the module

Duane Degn · 2012-03-28 19:44

Anything else?

erco · 2012-03-28 19:49

See link at bottom: http://www.generationrobots.com/say-il-module-voice-recognition-robot-parallax,us,4,say-it-Parallax.cfm

Edit: Duane wins. He types faster, replied faster and most of all, his GUI version is higher!

I'll get you, Duane. And your little bot, too!

kails247 · 2012-03-28 19:52

Thank you! hopefully it works!

Mike Green · 2012-03-28 20:00

In the future, please do not cross-post (post the same question in more than one forum).

Duane Degn · 2012-03-28 20:15

For those who'd like to use the SayIt with the Propeller, I've made a simple bridge program to use the GUI with a Prop.

Edit: Fixed link.

graffix · 2020-01-31 02:18

Duane Degn wrote: »

For those who'd like to use the SayIt with the Propeller, I've made a simple bridge program to use the GUI with a Prop.

Sorry Im late to the party. I just pulled out my old say it module. Im looking into using it with a propeller and blockly. Do you think that is possible?

Duane Degn · 2020-01-31 04:18

Fixed the link.

Buck Rogers · 2020-01-31 13:58

Wow that one was a poser. Duane you're still the next best thing to happen to the Forum. And of course a surprise given its age.

graffix · 2020-01-31 15:03

Thanks Duane, and yes Buck hes always been pretty helpful.

graffix · 2020-02-01 18:58

Would just setting up the say it module using a BS2 and the GUI then trying to reproduce the output code in spin or blockly work? I see the trigger words are stored right on the module itself once trained. My old stored words were still on it from my home automation project.

Duane Degn · 2020-02-01 23:12

It shouldn't matter what you use to setup the trigger words. Once those words are programmed in you just need to monitor the output from the SayIt.

Say it Module disappearance?

Comments