Shop OBEX P1 Docs P2 Docs Learn Events
BS2 carrier board needed — Parallax Forums

BS2 carrier board needed

Machine27Machine27 Posts: 2
edited 2007-03-26 02:04 in General Discussion
I'm looking for a carrier board for the BS2, not the typical Parallax boards but something much smaller.· I would really like to find something about the size of the BS1 version DX board.· Needed items are a very small proto type area (similar to the BS1 board), serial plug, pads for the first 8 I/O's and a vin·and GND·pad.· Does anyone know of someone who has designed such a board I can purchase.·· If it's what I need, I would be interested in a volume buy of them.· I've·tried to use the BS1 and it's just not fast enough for my application.· I know nothing of designing my own boards and don't want to have to learn for this project.
Thanks!·

Comments

  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2007-03-26 02:04
    Maybe the MoBoStamp-pe will work for you. It measures 2.75" x 1.35", has a connector for Vin and Gnd, and sockets for various port pins. It doesn't have a proto area, but a prototyping daughterboard will be available soon. The daughterboards plug into 2mm sockets, so the MB/DB vertical profile is quite compact. Also, in lieu of an RS232 port, it has a USB port (which can power the entire board, BTW).

    -Phil

    Update: Added a datasheet for the Proto-DB.

    Post Edited (Phil Pilgrim (PhiPi)) : 3/26/2007 2:53:20 AM GMT
    pdf
    pdf
    Proto-DB_doc.pdf
    609K
Sign In or Register to comment.