Shop OBEX P1 Docs P2 Docs Learn Events
Video connector — Parallax Forums

Video connector

NewzedNewzed Posts: 2,503
edited 2006-05-21 23:41 in General Discussion
Does anyone have a Digikey part number for the 15-pin female video connector?

Thanks

Sid

Comments

  • PJAllenPJAllen Banned Posts: 5,065
    edited 2006-05-21 16:44
    Well, here's the page from the Jameco catalog, if you like (didn't know if you want solder cups, or board mount, or,...) -- http://www.jameco.com/Jameco/catalogs/c22/P119.pdf

    http://dkc3.digikey.com/PDF/T062/0188.pdf

    Post Edited (PJ Allen) : 5/21/2006 4:48:53 PM GMT
  • NewzedNewzed Posts: 2,503
    edited 2006-05-21 17:08
    Thanks, PJ.· That page couldn't be found but I finally got to the right page.· I really needed a tech drawing - have one of the conectors around here somewhere but I can't find it, and there is no footprint in Express for this high density Dsub.· I have Eagle lit but I don't know if there is one in Eagle or not.

    Sid
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-05-21 18:14
    I found the Female VGA connector in Eagle Lite V4.15 under Harting Sub-D Connectors.· HF15.· I don't recall if this is a library I added from their website or a stock one, but I think it is stock.


    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
    csavage@parallax.com
  • NewzedNewzed Posts: 2,503
    edited 2006-05-21 18:45
    I have Eagle Lite V4.16 but there us no Harting SubD library listing, only con-harting, con-harting-h.lbr, con-harting-ml.lbr, con-harting-v.lbr and con-harting-lbr; ·however, I did find a data sheet and I think I can make my own in Express.· Wonder why V4.15 has it but V4.16 does not.

    Sid
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-05-21 21:10
    con-subd.lbr is on my system, but I may have added it.· Oddly enough it is lower than the other entries.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
    csavage@parallax.com
  • NewzedNewzed Posts: 2,503
    edited 2006-05-21 21:23
    Chris, I found con-subd.lbr, and I found the right connector.· I was looking for con-harting-subd.lbr.· Can I purchase a couple of these from Parallax?

    Sid
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-05-21 23:41
    Sid,

    ·· We don't have these available for retail...You'd have to go to Jameco or DigiKey.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
    csavage@parallax.com
Sign In or Register to comment.