Shop OBEX P1 Docs P2 Docs Learn Events
My Bipedal robot — Parallax Forums

My Bipedal robot

roboneticsrobonetics Posts: 16
edited 2005-09-13 20:14 in Robotics
Hello all,
··········· Here is my bipedal robot. named" robot warrior " , this is my 2nd bipedal robot, the first one stand 3' tall & had over 34 servos.·this one·stands at 24" tall 9"wide, has 24 high torque servos 1- bs2e board 1-ssc-32 board , 1-irpd SENSOR, 1- 7.2v battery pack, 1- ps2 port, gws gyros , and a pc video cam for it's head.
·········· i've cast my own plastic peices out of smooth-on smoothcast 300 plastic resin. still casting legs & arms covers also casting the waist out of smooth on dragon skin resin. the hands are also cast in plastic resin.
·········· IT'S ALIVE!!!! but only when i download movements to the bs2e board, trying to work out the ps2 controller to work with it.
·········· i have it selling now on ebay under "humanoid robot", but if it doesn't sell , i will be upgrading it with more servos & sensors & wireless cams.

if you want to email me with any questions you can email me at robonetics@hvc.rr.com

thank you for looking
charlie aka robonetics
··········

Comments

  • ManuelManuel Posts: 105
    edited 2005-09-07 03:46
    NICE, what can your robot do?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Best Regards

    Manuel C. Reinhard
  • roboneticsrobonetics Posts: 16
    edited 2005-09-07 22:58
    right now it can move it's head left & right, move it's arms up,down,left & right turn it's elbow left & right & bend it's elbow up & down. also move it's wrist up & down.
    ·the robot can also bend at the waist up & down & turn it's chest left & right. it also can move it's legs up down left & right, bend it's knee up & down & move it's ankel up down left & right.
    ·with the video cam you can see what the robot is facing or where it's going.
    i'm still qorking on the project, mostly the programming of the robot.
    ·also trying to get it so i can control it via ps2 controller.

    also working on it to keep it's balance with out any help or support.
    i've designed it for combat like the ones that you see on robocup. the robot also has a sword that it can hold in its hand. the hands do not move at this time they are pre-posed. that i've made out of plastic resin.
    looking for some help with the programming part, but so far, no one has helped me with programming.

    want to learn how to make a data base for the robot so it can think on it's own, also trying to find a better way to program the bs2e board with out using the SEROUT command for the servos being it use to much mem on the bs2e board.

    below is a sample of programming i've been using. but get the error"out of mem",·want to fine or have someone else show me a better way to program the board using the servos.

    any help,input or idea's would be great.

    thankz
    charlie

    '*************************************
    '*····· program type:STAMP BS2E···················· *
    '*······· version:PBASIC 2.5························ ··· *
    '*************************************
    '* programmer: Charles W. Scilabro Jr·············· *
    '*········· Date:8/27/05·································· *
    '*·· Email:     robonetics@hvc.rr.com····················*
    '*************************************
    '*········· File:·complete movements················· *
    '*************************************

    ' {$STAMP BS2e}
    ' {$PBASIC 2.5}
    SEROUT 15,6,[noparse][[/noparse]"#27 p900 #10 p1300 #26 p900 #11 p1900 #30 p2500 #14 p2500 #29 p1600 #13 p1200 #28 p1500 #12 p2000 #21 p1200 t1000",13] 'standing pose
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p500 #20 p2300 #5 p1600 #19 p1000 #4 p2000 #18 p1500 #7 p100 #17 p1700 #3 p1500 #16 p1300 t1000",13]··············· 'arm pose
    PAUSE 1000
    start:
    GOSUB leftarm
    movehead:
    SEROUT 15,6,[noparse][[/noparse]"#21 p1300 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1700 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p2000 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1700 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1500 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1300 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1000 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p500 t1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#23 p1350 t1000",13]
    PAUSE 3000
    GOSUB bendwaist
    leftarm:
    SEROUT 15,6,[noparse][[/noparse]"#6 p1500 #5 p2000 #4 p1000 #7 p1400 #3 p1700 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p2000 #5 p2000 #4 p1000 #7 p1400 #3 p1700 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p1500 #5 p1500 #4 p1500 #7 p1000 #3 p1000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p500 #5 p500 #4 p2000 #7 p500 #3 p500 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p2000 #5 p2000 #4 p1000 #7 p1500 #3 p1700 t1000",13]
    PAUSE 1200
    GOSUB rightarm
    wavelefthand:
    SEROUT 15,6,[noparse][[/noparse]"#6 p1800 #4 p1000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#4 p2000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#4 p1000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#4 p2000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#6 p100 #5 p1600 #4 p2000 #7 p100 #3 p1500 t1000",13]··············· 'left arm pose
    PAUSE 1000
    GOSUB waverighthand
    rightarm:
    SEROUT 15,6,[noparse][[/noparse]"#20 p2300 #19 p1000 #18 p1500 #17 p1700 #16 p1300 t1000",13]··············· 'right arm pose
    PAUSE 1000
    GOSUB wavelefthand
    waverighthand:
    SEROUT 15,6,[noparse][[/noparse]"#20 p2300 #18 p1500 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#18 p2000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#18 p1500 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#18 p2000 t1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#20 p2100 #19 p1000 #18 p1500 #17 p1700 #16 p1000 t1000",13]··············· 'right arm pose
    PAUSE 1000
    GOSUB movehead
    bendwaist:
    SEROUT 15,6,[noparse][[/noparse]"#21 p1500 t1000",13] ' HOME point
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#21 p1000 t1000",13] 'bends forward
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#21 p2000 t1000",13] ' bends backwards
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#21 p1500 t1000",13] 'home point
    PAUSE 1000
    GOSUB turnchest
    turnchest:
    SEROUT 15,6,[noparse][[/noparse]"#22 p1350 t1000",13] ' home point
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#22 p1000 t1000",13] ' turns right
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#22 p1350 t1000",13]· 'home point
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#22 p2000 t1000",13]·· 'turns left
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#22 p1350· t1000",13]· ' home point
    PAUSE 3000
    GOSUB left_leg
    left_leg:
    SEROUT 15,6,[noparse][[/noparse]"#10 p1300 #11 P2000 #14 P2500 #13 P1300 #12 P2000 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#10 P1300 #11 P1000 #14 P1000 #13 P1300 #12 P2000 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#10 P2000 #11 P1000 #14 P1000 #13 P1000 #12 P1500 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#10 P1300 #11 P1000 #14 P1000 #13 P1800 #12 P1000 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#10 P1300 #11 P2000 #14 P2500 #13 P1300 #12 P2000 T1000",13]
    PAUSE 3000
    GOSUB right_leg

    right_leg:
    SEROUT 15,6,[noparse][[/noparse]"#27 p900 #26 P800 #30 P2500 #29 P1500 #28 P1600 T1000",13]
    PAUSE 1000
    SEROUT 15,6,[noparse][[/noparse]"#27 p900 #26 P1500 #30 P2000 #29 P1500 #28 P1600 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#27 p1100 #26 P1500 #30 P1500 #29 P1000 #28 P1000 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#27 p900 #26 P1500 #30 P1500 #29 P2000 #28 P2000 T1000",13]
    PAUSE 3000
    SEROUT 15,6,[noparse][[/noparse]"#27 p900 #26 P800 #30 P2500 #29 P1500 #28 P1600 T1000",13]
    PAUSE 3000
    GOSUB home_point
    home_point:
    SEROUT 15,6,[noparse][[/noparse]"#21 p1500 #22 p1350 #23 p1300 #20 p2300 #19 p1000 #18 p1500 #17 p1700 #16 p1300 #6 p1500 #5 p2000 #4 p1000 #7 p1400 #3 p1700 #6 p1500 #5 p2000 #4 p1000 #7 p1400 #3 p1700 #27 p900 #26 P800 #30 P2500 #29 P1500 #28 P1600 t1000",13]
    END
  • SN96SN96 Posts: 318
    edited 2005-09-08 01:31
    You did a fantastic job tucking the wires neatly away! Very nice Biped!
  • roboneticsrobonetics Posts: 16
    edited 2005-09-08 01:56
    thank you, it took alot of work. still working on it. mostly programming end.

    do you have a robot? if so i would like to see it."bipedal or other".

    thank you again.

    charlie
  • SN96SN96 Posts: 318
    edited 2005-09-13 20:14
    I have plans to make a biped but I need to replace a broken dishwasher first. When the time comes, I will build either a reverse knee biped, like the one in Robocop, or a clasic humanoid type of robot. I will post pics and videos when it is complete.

    In the mean time, I might try to create a quad walker with the 5 servos I currently have and "whip" something together.



    Mike
Sign In or Register to comment.