PST input - Timer that expires with no entry

Jeffrey Kane · 2022-05-10 20:19

Hello,

I think there are a bunch of ways to do this, but currently I'm drawing a blank
I'm using spin,

I have a PST loop as below:

Hex_value := $FFFFFFFF PST.Str(string("Enter the hex value to be used - max FFFFFFFF ")) ' get entry from the keyboard on pst start repeat Hex_value := PST.HexIn ' wait for character to be typed PST.Str(string("Value entered: ")) PST.Hex(Hex_Value,8) PST.NewLine quit

I would like the repeat loop to expire after maybe 10 seconds, in case there is no input, or there is no PST connected, so that the program can continue using the default values.

Hex_value := $FFFFFFFF PST.Str(string("Enter the hex value to be used - max FFFFFFFF ")) ' get entry from the keyboard on pst start repeat ' until timer expires Hex_value := PST.HexIn ' wait for character to be typed PST.Str(string("Value entered: ")) PST.Hex(Hex_Value,8) PST.NewLine quit

I searched the forum and I didn't find anything,

any help would be appreciated

regards

Jeff

JonnyMac · 2022-05-10 20:42

You're going to need a customized entry method with a timeout. Have a look at .rxtime() in fullduplexserial.spin to see how you can add a time-out to an input. This feature is not part of the simple PST object.

This works:

pub hex_entry(p_prompt, toms, digits, default) | c, d, n

  term.str(p_prompt)

  c := term.rxtime(toms)                                        ' wait for 1st char
  if (c < 0)                                                    ' if timeout
    return default                                              '  return default value

  d := to_hex(c)                                                ' convert to hex
  if (d < 0)                                                    ' if not hex
    return default                                              '  abort with default
  else
    term.tx(c)                                                  ' update termina.
    result := d                                                 ' set initial result
    n := 1                                                      ' set digits count

  repeat
    c := term.rx                                                ' get a character
    case c
      8 :                                                       ' Backspace
        if n > 0                                                ' digits to erase?
          term.tx(8)                                            ' clear from terminal
          result >>= 4                                          ' remove last digit from result
          n -= 1                                                ' update digit count

      13 :                                                      ' Enter
        return result

      other :
        d := to_hex(c)                                          ' convert to hex
        if (d => 0)                                             ' if valid hex
          term.tx(c)                                            '  display
          result := (result << 4) | d                           '  update result
          n += 1                                                '  bump digit count



pub to_hex(c)

  if (c => "a") and (c =< "z")
    c -= 32                                                     ' make uppercase

  result := lookdown(c : "0123456789ABCDEF") - 1

Jeffrey Kane · 2022-05-11 14:17

I was trying to stay with PST, and this feature is not super important, more of a diag work, so I just used a pin to enable or disable the feature.

Jeffrey Kane · 2022-05-11 18:53

results, works great

if you wait for the time to expire you get the default which is 00000000

thanks

Jeff

Jeffrey Kane · 2022-05-12 14:02

PST input - Timer that expires with no entry

Comments