Rev.B Asm/Spin examples that run under FlexGui

Rayman · 2019-11-18 18:37

I can't find a list of examples that work on Rev.B hardware and FlexGui (Asm examples should work under PNut)...

I may post a couple here... Feel free to add to this...

Here's one for the "Control" board (slightly modified version of Parallax example). Nothing special, should run on Rev. A too.

Rayman · 2019-11-18 18:58

Here's the HDMI example from Rev.B documentation that is slightly modified to fill bottom of screen with blue.
This is helpful for monitors that do weird things when there are only 350 non-black lines.

Rayman · 2019-11-18 19:00

BTW: When I first ran the above, it had a typo that gave a resolution of 640x795... and my monitor showed it anyway!

Rayman · 2019-11-18 19:19

Here's the original VGA example, modified for Rev.B

Rayman · 2019-11-18 20:03

Here's garryj's USB keyboard/mouse demo that works under Flexgui.
I stole the Rev.B mods from Eric Smith's micropython code.

"KbMObjTest.spin2" is the main file and the other is the assembly driver.

This is rigged for the USB serial host expansion board on P0...P8 using lower USB port.
You can change the base pin in the "1CogKbM" file.

Rayman · 2019-11-18 20:29

Here's HyperRam+VGA example with Parallax HyperRam/Flash board on P32+ and VGA on P0+

(I tested this on my own hardware, but pretty sure it will work on Rev.B Eval board)

Rev.B Asm/Spin examples that run under FlexGui

Comments