Can anybody identify this MMC card socket?

Comments

• Matthew Posts: 200

  2005-01-29 18:04 edited 2005-01-29 18:04

  I don't know who makes that one, but Spark Fun makes a nice one as well:
  
  http://www.sparkfun.com/shop/index.php?shop=1&cart=152502&cat=1&itemid=330&
• Matthew Posts: 200

  2005-01-29 18:05 edited 2005-01-29 18:05

  Or try this:
  
  http://www.sparkfun.com/shop/index.php?shop=1&cart=152502&cat=1&itemid=331&
• Jim McCorison Posts: 359

  2005-01-29 18:24 edited 2005-01-29 18:24

  Matthew,
  
  Thanks, but these won't fit the bill. I'm looking for a connector which will rigidly hold the MMC card in place. Ideally I'd like to be able to do this without additional hardware or case design features. That's why the one that BiPom is using is so appealing. It mounts flush on the surface of the board and has a spring loaded latch that locks the card in place. You can see that latch on the left side of the card in the photo.
  
  Jim
• Matthew Posts: 200

  2005-01-29 18:36 edited 2005-01-29 18:36

  Yea, I was thinking about that.
  
  I'll let you know if I see anything of its type.
• Paul Baker Posts: 6,351

  2005-01-30 01:55 edited 2005-01-30 01:55

  I looked around, but I couldn't find any. My only suggestion is to ask the company that sells the board. Perhaps its a euro part, they don't advertise on the web as much as american manufacturers do.