Computer
Control Side |
On-Line, Real time Control available
|
Consisting of Priority interrupt method
by RS-232C |
Step/ sequential control by Control
program |
Rotation including reverse available by
Control Program |
Output Pulse Frequency Control
available by Control Program |
Available to experiment the character
of Angle and vibration through Simulation Software |
Manual
Control Side
|
Available to insert Manual Set-up
value directly |
Available for step/continuous driving
by manual setup value |
Available for controlling rotation/reverse
direction by manual setup value |
Available for output pulse frequency control by
Manual setup value |
Available to control speed by Manual setup
value |
Available to control step/ sequential drive by
Joy-stick |
Available to control the speed by Frequency
modulation at manual |
Stamping
Motor : 2ea
|
2-phase HB type,
rotation speed : 0~2000PPS |
Unipola driving type,
unit rotation angle: |
Use PWM static current
driving drive . |
LM GUIDE driving and
round board driving (for angle measuring) |
LM
GUIDE(1set) |
Type: plane type |
Ball screw moving
distance: over 200§® |
Position-key |
Installing safety
equipment in being over Driving range |
Angle Inspection
Equip.(1set) |
ROTARY
ENCODER |
Over 400/ Rev |
LED equip for Output signal and
Communication |
Position detection photo sensor |
Including LCD display equipment (indicating
rotation angle and moving
distance) |