// This is the KEYES IR Remote sample code.. no real indication of which remote code.

/* YourDuino.com Example Software Sketch
 Brick Starter Set IR Remote Kit Test
http://yourduino.com/sunshop2/index.php?l=product_detail&p=364
 based on code by Ken Shirriff - http://arcfn.com
 Get Library at: https://github.com/shirriff/Arduino-IRremote
 Unzip folder into Libraries. RENAME folder IRremote
 terry@yourduino.com */

/*-----( Import needed libraries )-----*/

#include "IRremote.h"

/*-----( Declare Constants )-----*/
int receiver = 11; // pin 1 of IR receiver to Arduino digital pin 11

/*-----( Declare objects )-----*/
IRrecv irrecv(receiver);           // create instance of 'irrecv'
decode_results results;            // create instance of 'decode_results'
/*-----( Declare Variables )-----*/


void setup()   /*----( SETUP: RUNS ONCE )----*/
{
  Serial.begin(9600);
  Serial.println("YourDuino IR Receiver Button Decode Test");
  Serial.println("Questions: terry@yourduino.com");  
  irrecv.enableIRIn(); // Start the receiver

}/*--(end setup )---*/


void loop()   /*----( LOOP: RUNS CONSTANTLY )----*/
{
  if (irrecv.decode(&results)) // have we received an IR signal?

  {
    Serial.println(results.value, HEX);  UN Comment to see raw values
    translateIR(); 
    irrecv.resume(); // receive the next value
  }  
}/* --(end main loop )-- */

/*-----( Declare User-written Functions )-----*/
void translateIR() // takes action based on IR code received
{
        Serial.println("nothing set to translate to as of yet");

// describing KEYES Remote IR codes 

{

  switch(results.value)

  {

  case 0xFF629D: Serial.println(" FORWARD"); break;
  case 0xFF22DD: Serial.println(" LEFT");    break;
  case 0xFF02FD: Serial.println(" -OK-");    break;
  case 0xFFC23D: Serial.println(" RIGHT");   break;
  case 0xFFA857: Serial.println(" REVERSE"); break;
  case 0xFF6897: Serial.println(" 1");    break;
  case 0xFF9867: Serial.println(" 2");    break;
  case 0xFFB04F: Serial.println(" 3");    break;
  case 0xFF30CF: Serial.println(" 4");    break;
  case 0xFF18E7: Serial.println(" 5");    break;
  case 0xFF7A85: Serial.println(" 6");    break;
  case 0xFF10EF: Serial.println(" 7");    break;
  case 0xFF38C7: Serial.println(" 8");    break;
  case 0xFF5AA5: Serial.println(" 9");    break;
  case 0xFF42BD: Serial.println(" *");    break;
  case 0xFF4AB5: Serial.println(" 0");    break;
  case 0xFF52AD: Serial.println(" #");    break;
  case 0xFFFFFFFF: Serial.println(" REPEAT");break;  

  default: 
    Serial.println(" other button   ");

  }// End Case

  delay(500); // Do not get immediate repeat


} //END translateIR



/* ( THE END ) */