' =========================================================================
'
'   File....... TERM-SEROUT.BS2
'   Purpose....
'   Author..... Jon Williams -- Parallax, Inc.
'   E-mail..... jwilliams@parallax.com
'   Started....
'   Updated.... 06 FEB 2006
'
'   {$STAMP BS2}
'   {$PBASIC 2.5}
'
' =========================================================================


' -----[ Program Description ]---------------------------------------------


' -----[ Revision History ]------------------------------------------------


' -----[ Conditional Definitions ]-----------------------------------------


' -----[ I/O Definitions ]-------------------------------------------------

Sio             CON     16                      ' use programming port


' -----[ Constants ]-------------------------------------------------------

#SELECT $STAMP
  #CASE BS2, BS2E, BS2PE
    T1200       CON     813
    T2400       CON     396
    T4800       CON     188
    T9600       CON     84
    T19K2       CON     32
    TMidi       CON     12
    T38K4       CON     6
  #CASE BS2SX, BS2P
    T1200       CON     2063
    T2400       CON     1021
    T4800       CON     500
    T9600       CON     240
    T19K2       CON     110
    TMidi       CON     60
    T38K4       CON     45
  #CASE BS2PX
    T1200       CON     3313
    T2400       CON     1646
    T4800       CON     813
    T9600       CON     396
    T19K2       CON     188
    TMidi       CON     108
    T38K4       CON     84
#ENDSELECT

SevenBit        CON     $2000
Inverted        CON     $4000
Open            CON     $8000

Baud            CON     T9600


' -----[ Variables ]-------------------------------------------------------

eePntr          VAR     Byte
char            VAR     Byte


' -----[ EEPROM Data ]-----------------------------------------------------

Msg1            DATA    "Joy to the world.", CR, 0


' -----[ Initialization ]--------------------------------------------------

Reset:


' -----[ Program Code ]----------------------------------------------------

Main:
  eePntr = Msg1                                 ' point to message
  GOSUB Print_Str                               ' send to serial port
  PAUSE 1000
  GOTO Main

  END


' -----[ Subroutines ]-----------------------------------------------------

Print_Str:
  DO
    READ eePntr, char
    eePntr = eePntr + 1
    IF char = 0 THEN EXIT
    SEROUT Sio, Baud, [char]
  LOOP
  RETURN 