' =========================================================================
'
'   File...... Serial_LCD_Template.BS2
'   Purpose... Template for Parallax Serial LCD
'   Author.... (c) Parallax, Inc. -- All Rights Reserved
'   E-mail.... support@parallax.com
'   Started...
'   Updated... 11 FEB 2005
'
'   {$STAMP BS2}
'   {$PBASIC 2.5}
'
' =========================================================================


' -----[ Program Description ]---------------------------------------------


' -----[ Revision History ]------------------------------------------------


' -----[ I/O Definitions ]-------------------------------------------------

TX              PIN     0               ' serial output to LCD


' -----[ Constants ]-------------------------------------------------------

#SELECT $STAMP
  #CASE BS2, BS2E, BS2PE
    T2400       CON     396
    T9600       CON     84
    T19K2       CON     32
  #CASE BS2SX, BS2P
    T2400       CON     1021
    T9600       CON     240
    T19K2       CON     110
  #CASE BS2PX
    T2400       CON     1646
    T9600       CON     396
    T19K2       CON     188
#ENDSELECT

LcdBaud         CON     T19K2

LcdBkSpc        CON     $08             ' move cursor left
LcdRt           CON     $09             ' move cursor right
LcdLF           CON     $0A             ' move cursor down 1 line
LcdCls          CON     $0C             ' clear LCD (use PAUSE 5 after)
LcdCR           CON     $0D             ' move pos 0 of next line
LcdBLon         CON     $11             ' backlight on
LcdBLoff        CON     $12             ' backlight off
LcdOff          CON     $15             ' LCD off
LcdOn1          CON     $16             ' LCD on; cursor off, blink off
LcdOn2          CON     $17             ' LCD on; cursor off, blink on
LcdOn3          CON     $18             ' LCD on; cursor on, blink off
LcdOn4          CON     $19             ' LCD on; cursor on, blink on
LcdLine1        CON     $80             ' move to line 1, column 0
LcdLine2        CON     $94             ' move to line 2, column 0

LcdCC0          CON     $F8             ' define custom char 0
LcdCC1          CON     $F9             ' define custom char 1
LcdCC2          CON     $FA             ' define custom char 2
LcdCC3          CON     $FB             ' define custom char 3
LcdCC4          CON     $FC             ' define custom char 4
LcdCC5          CON     $FD             ' define custom char 5
LcdCC6          CON     $FE             ' define custom char 6
LcdCC7          CON     $FF             ' define custom char 7


' -----[ Variables ]-------------------------------------------------------


' -----[ EEPROM Data ]-----------------------------------------------------


' -----[ Initialization ]--------------------------------------------------

Reset:
  HIGH TX                               ' setup serial output pin
  PAUSE 100                             ' allow LCD to initialize


' -----[ Program Code ]----------------------------------------------------

Main:

  ' your code here

  GOTO Main
  END


' -----[ Subroutines ]----------------------------------------------------- 