Shop OBEX P1 Docs P2 Docs Learn Events
scenix 28 in pcb123 parts library? — Parallax Forums

scenix 28 in pcb123 parts library?

detectordetector Posts: 1
edited 2005-01-04 17:41 in General Discussion
Does anyone know of a download for a scenix 28 part or a pic 16c57 for the PCB123 parts / schematic library? It seems this would be a common need. There must be something similar for Eagle. I am still using version 1 of PCB123 but may get to version 2 soon.

Comments

  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-01-01 19:27
    Shouldn't you check with the folks who make PCB123?...

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
    Dallas, TX· USA
  • LoopyBytelooseLoopyByteloose Posts: 12,537
    edited 2005-01-04 15:45
    You can add anything you want to their library (on your own computer) through the provided software. 28 pins is not much to handle, 52 pins is a bit of a job.

    The advantages with this approach are that you can use proprietary designations for key components if you don't want others to simply copy and populate your board.

    Actually, the correct design is your responsiblity, so they just care that you provide files that make manufacture doable. They do provide proto-typical packages to work from.

    And once you have the SX-28 in there, it will save time in the future.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    G. Herzog in Taiwan
  • Guenther DaubachGuenther Daubach Posts: 1,321
    edited 2005-01-04 17:41
    For EAGLE, you can find SX-related component libraries on Cadsoft's site at

    ftp://ftp.cadsoft.de/pub/userfiles/libraries/scenix4.lbr
    ftp://ftp.cadsoft.de/pub/userfiles/libraries/ubicom.lbr
    ftp://ftp.cadsoft.de/pub/userfiles/libraries/ubicom_v2.lbr

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Greetings from Germany,

    G
Sign In or Register to comment.