Shop OBEX P1 Docs P2 Docs Learn Events
no basic stamp found — Parallax Forums

no basic stamp found

fred1456fred1456 Posts: 13
edited 2010-10-01 07:30 in BASIC Stamp
yes, an another.

my old basic stamp is not found by the computer. i have read and follow all advices about this problem and i try to resolve this by myself. and i fail

i have win XP family edition service pac 2, an Board of Education Development Board - Serial Version and a BS2 (the green one)


i have tried with 3 diff

Comments

  • dandreaedandreae Posts: 1,375
    edited 2010-09-23 10:29
    What does it say when you click on "Run" and "Identify"? If you have a multi-meter please measure:

    Vin to Vss =
    Vcc to Vss =
    Rst to Vss =

    Let me know what the measurements are?

    Dave
  • fred1456fred1456 Posts: 13
    edited 2010-09-23 11:37
    i have no multimeter, i take one from the work next week for measurments

    have you an idea? thanks for helping
    1152 x 864 - 81K
    1152 x 864 - 93K
    1.PNG 80.5K
    2.PNG 92.5K
  • dandreaedandreae Posts: 1,375
    edited 2010-09-23 15:04
    Are you able to remore your port directive? If so, this most likely what is causing the issue.

    Dave
  • fred1456fred1456 Posts: 13
    edited 2010-09-24 08:44
    did you mean remove the line "$port COM1" in the program ?

    i try, and the stamp is not found, but the message is different :

    just "communication error no stamp found"
    eccos and loopback are yes.

    the try was done with a new battery

    thanks for help
  • sam_sam_samsam_sam_sam Posts: 2,286
    edited 2010-09-25 07:49
    What version of Basic Stamp editer are you using
  • fred1456fred1456 Posts: 13
    edited 2010-09-25 08:29
    the last test was done with the 2.5
  • fred1456fred1456 Posts: 13
    edited 2010-09-27 10:35
    measurments done

    try with a 7.5 v RC car battery

    Vin to Vss = 6.05 V for the second measurment, but first measurments was 7.5v i don't undestand why the value change, because nothing change (same battery, same connection)

    Vcc to Vss =0.669 v
    Rst to Vss = 0.033 v

    thanks from Belgium
  • dandreaedandreae Posts: 1,375
    edited 2010-10-01 07:30
    The Rst should be 5v. This is likely the issue. Where did you purchase the BASIC stamp from?

    Dave
Sign In or Register to comment.