BS2e or higher and external EEPROMs

[Archiver]

I see that the BS2e has 38 Bytes RAM and 128 Bytes SCRATCH RAM.
I may need MORE! Potentially up to 5KB RAM or more. Can the BS2e
and higher communicate with an extra EEPROM?
If so, how? I don't need a full explanation (unless you want to),
just directions to a reference (Parallax App Note or other stuff)
that shows how to do it.
Is there a max on how big of EEPROM the Basic Stamp(s) can access,
assuming they can?

Thanks in advance!
Don

[Archiver]

CORRECTION: I meant BS2p24 in the first line.


--- In basicstamps@y..., "mtlhead7" <renegade.engineer@v...> wrote:
> I see that the BS2e has 38 Bytes RAM and 128 Bytes SCRATCH RAM.
> I may need MORE! Potentially up to 5KB RAM or more. Can the BS2e
> and higher communicate with an extra EEPROM?
> If so, how? I don't need a full explanation (unless you want
to),
> just directions to a reference (Parallax App Note or other stuff)
> that shows how to do it.
> Is there a max on how big of EEPROM the Basic Stamp(s) can
access,
> assuming they can?
>
> Thanks in advance!
> Don