Results 1 to 2 of 2

Thread: BS2-DS1620-VB6(MSChart)

  1. #1

    Default BS2-DS1620-VB6(MSChart)

    Hi , I would like to take my temperature from the 1620 into VB6 and plot that
    variable onto a chart. Ive got everything working fine, except for the chart
    control, although I am able to plot the first temp sent, anyone know how to
    use this control good, I could use a few pointers, or a code snippet. Also, I
    dont want to use pin 16 on the BS2, but am a little confused as to the
    hardware hookup to an I/O pin on the stamp. I have the schematics for it, but
    a little explanation would be helpful so I could understand exactly whats
    happening.
    Thanks in advance
    Lou
    Last edited by ForumTools; 10-01-2010 at 04:01 AM. Reason: Forum Migration

  2. #2

    Default

    Lou,

    This should get you started. Attached is a quick example to show an easy
    way to get your data into the chart.

    MSChart has far greater capabilities than this demo show's but you'll need a
    book to go there.

    As for the BS2 question mabey one of our hardware experts will help there.


    Regards
    Mike Witherspoon

    -----Original Message-----
    From: Lusabi1@a... <mailto:Lusabi1@a...> [ mailto:Lusabi1@a...
    <mailto:Lusabi1@a...> ]
    Sent: Friday, February 09, 2001 8:39 AM
    To: basicstamps@yahoogroups.com <mailto:basicstamps@yahoogroups.com>
    Subject: [basicstamps] BS2-DS1620-VB6(MSChart)



    Hi , I would like to take my temperature from the 1620 into VB6 and plot
    that
    variable onto a chart. Ive got everything working fine, except for the chart

    control, although I am able to plot the first temp sent, anyone know how to
    use this control good, I could use a few pointers, or a code snippet. Also,
    I
    dont want to use pin 16 on the BS2, but am a little confused as to the
    hardware hookup to an I/O pin on the stamp. I have the schematics for it,
    but
    a little explanation would be helpful so I could understand exactly whats
    happening.
    Thanks in advance
    Lou
    Last edited by ForumTools; 10-01-2010 at 04:01 AM. Reason: Forum Migration

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts