Results 1 to 2 of 2

Thread: LCD on BS2SX

  1. #1

    Default LCD on BS2SX

    Hello
    I have a BS2SX
    I want to use an LCD serial 2X16
    My problem is on the LCD panel I have
    1 VSS it's ok
    2 VDD it's ok
    3 CS what I do with it
    4 SID is it equivalent of SED
    does I connect it to one ouput of my BS2SX
    5 CLK what I do with it
    6 SOD what I do with it
    7 Power Supply for led + it's ok
    8 Power Supply for led - it's ok
    Do you have a small programm and a notice
    Thank's
    I hope you can help me
    If you Know a web adress where I can improve my english free I am
    very interest too
    Last edited by ForumTools; 10-02-2010 at 06:27 PM. Reason: Forum Migration

  2. #2

    Default

    --- In basicstamps@egroups.com, dreamtex@f... wrote:
    > Hello
    > I have a BS2SX
    > I want to use an LCD serial 2X16

    I dont know what LCD you are using but I'll try and answer from
    previous experience

    > My problem is on the LCD panel I have
    > 1 VSS it's ok
    > 2 VDD it's ok
    > 3 CS what I do with it

    This is probably a chip select pin. You make it high or low to enable
    the data to be sent to the LCD. Must be a unique pin in BS2SX.

    > 4 SID is it equivalent of SED

    Probably serial input data

    > does I connect it to one ouput of my BS2SX

    you can probably connect it to the same pin as the output line with a
    1K resistor.

    > 5 CLK what I do with it

    This is the clock line. Needs another pin on BS2sx but can be shared
    by any other serial devices.

    > 6 SOD what I do with it

    Probably output

    > 7 Power Supply for led + it's ok
    > 8 Power Supply for led - it's ok
    > Do you have a small programm and a notice
    > Thank's
    > I hope you can help me

    Try and get the data sheet for the display. It will explain it much
    better than I can.

    Andy

    > If you Know a web adress where I can improve my english free I am
    > very interest too
    Last edited by ForumTools; 10-02-2010 at 06:27 PM. Reason: Forum Migration

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts