+ Reply to Thread
Results 1 to 13 of 13

Thread: Stack-through connectors

  1. #1

    Default Stack-through connectors

    Any leads on 40 pin (20x2) stackable pin headers?

  2. #2

    Default Re: Stack-through connectors

    I'm still looking for those myself.

    The best I've found so far is 10pin stackable headers.

    Jeff
    Visit PROPELLERPOWERED.COM -:- PMC/PEB 2014 available now!
    After you are done here, wander over to our friendly forums.
    Projects, not Platforms -:- Follow me on Twitter.

  3. #3

    Default Re: Stack-through connectors

    Samtec makes stackable connectors:

    http://www.samtec.com/standardboardt...ch_square.aspx
    Leon Heller
    G1HSM

  4. #4

    Default Re: Stack-through connectors

    Nice find Leon... Thanks for sharing.

  5. #5

    Default Re: Stack-through connectors

    Unfortunately stackables are hard to find, and NOT cheap - especially at the 2x20 size.

    When I designed Morpheus (2007), I had to order 1000pcs to get even a semi-decent price - and as I recall it had a six or eight week lead time. Later they doubled prices, and stopped making them.

    Adam Tech also makes them as I recall.

  6. #6

    Default Re: Stack-through connectors

    The PC-104 connector used one 2x32 and one 2x20 stackable header

    As Leon points out Samtec makes them, or if you can wait longer Oupiin or 4ucon (taiwan) also have them cheap.

  7. #7

  8. #8

  9. #9

    Default Re: Stack-through connectors

    Be sure to get specs from the eBay seller regarding the height of the housing above the PCB. There's some extra plastic on those that could produce a non-standard board spacing.

    -Phil

  10. #10

    Default Re: Stack-through connectors

    Very nice find! Will bring in a few for stock.

    Quote Originally Posted by rjo__ View Post
    http://www.ebay.com/itm/170578495165...84.m1497.l2649

    these are nice. 2X20 2.54mm a dollar each
    Visit PROPELLERPOWERED.COM -:- PMC/PEB 2014 available now!
    After you are done here, wander over to our friendly forums.
    Projects, not Platforms -:- Follow me on Twitter.

  11. #11

    Default Re: Stack-through connectors

    Quote Originally Posted by Oldbitcollector (Jeff) View Post
    Very nice find! Will bring in a few for stock.
    It sure is. I've been looking for these as well but the best price I'd got was $1.02 for a MOQ of 1k.
    TellMe Wearable™ , A Smart Bluetooth Notification Wearable Device for your smartphone
    Motion-Control your ActivityBot with your Android smartphone, MyActivityBot


    Kenichi

  12. #12

    Default Re: Stack-through connectors

    Quote Originally Posted by Oldbitcollector (Jeff) View Post
    Very nice find! Will bring in a few for stock.
    I haven't figured out how to buy things from ebay without going through paypal.
    We got burned bad a few years ago and will never use them again.

    Jeff, if you are going to bring in stock, I'll buy some from you.
    Say 20? Name your price!
    Or pm?

  13. #13

    Default Re: Stack-through connectors

    Let me make sure there isn't a height issue as Phil mentioned and I'll pull them in for stock.

    Jeff
    Visit PROPELLERPOWERED.COM -:- PMC/PEB 2014 available now!
    After you are done here, wander over to our friendly forums.
    Projects, not Platforms -:- Follow me on Twitter.

+ Reply to Thread

Similar Threads

  1. Stack connectors
    By max72 in forum General Discussion
    Replies: 13
    Last Post: 06-16-2011, 04:18 AM
  2. Morpheus connectors - vote finished, "short" connectors default for Morpheus
    By Bill Henning in forum Propeller 1 Multicore Microcontroller
    Replies: 10
    Last Post: 07-17-2009, 08:25 AM
  3. bytecode header q.: base of stack vs. initial stack pointer
    By mpark in forum Propeller 1 Multicore Microcontroller
    Replies: 5
    Last Post: 08-26-2008, 07:22 PM
  4. PC Stack and PC Shadow Stack, PushPC Secret instruction???
    By dkemppai in forum SX Chips and Programming Tools
    Replies: 5
    Last Post: 07-14-2005, 09:46 PM
  5. ot - connectors
    By Archiver in forum BASIC Stamps Archive
    Replies: 1
    Last Post: 09-26-2003, 10:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts