Nuntius: The Garden Avenger Robot now with video

[vanmunch]

A couple of years ago I first saw one of those self contained game systems that consist of just the joystick and the AV wires that you plug into your TV. I was simply amazed at the simplicity and brilliance of the concept. You just plug it in and play.

Nuntius is based on the same basic concept of those systems except it's a robot. The controller is a biomechanical input device that consists of a propeller proto board that measures the position of a 5 axis + gripper "mini arm" that you articulate with your hand, just like you would if you were actually there. The propeller then send the data via a XBEE to the robot. The result is that the big arm on the robot mirrors the mini arm and you control the robot by looking through a wireless camera that's attached to the gripper. The movement of the robot is proportional to the direction and how far the arm is extended (or pulled back for reverse). The further the arm is extended, the faster it goes in that direction. The robot only moves while you're holding down a button on the proto board. This allows you to drive the robot around and then stop and examine something with just a button and the mini arm. You just plug it in and do whatever... weed the lawn, weed the garden, weed the driveway, take the dog for a walk... from the safety and comfort of your couch.

Dave


Major components:
2 Propeller proto boards (from last year's UPEC & UPENE)
1 Propeller proto board enclosure
2 XBees
1 Parallax Wheel Kit (won at last year's UPENE, thanks again)
2 Parallax HB-25 Motor Controllers
Servos and Servo Brackets from Lyxmotion
Wireless camera

Video: Nuntius the Garden Avenger vs. The Weed!!!
http://www.youtube.com/watch?v=RnZ_UmJkjqs

[Ravenkallen]

Interesting project and the robot looks very professional.. I will look forward to seeing a video of it in action

[Duane Degn]

Wow! Wow! Wow!

That is sooo cool!

I love your controller. Amazing.

Man, I'll go to any UPE if can win a set of those motors and wheels.

Another super amazing robot.

Thank you very much for taking time to document it.

Duane

[NikosG]

Amazing project!
Congratulations! Give us more details , images and videos!

[graffix]

Are the camera and the Xbees on the same 2.4ghz?What kind of range are you getting?

[Tom C]

vanmunch,

Nice work! Very professional indeed!
Are those 1/4 scale servos in the robotic arm except for the gripper?
Regards,
TCIII

[erco]

Tremendous project and execution! You can sense the Forumista interest here in seeing more info & videos.

Well done, Dave. I want to know how easy/hard/dizzying it is to operate that arm with the camera mounted out on the arm. If ever you needed image stabilization, it's there!

Maybe a second cam on the base on a pan & tilt head... as long as I'm dreaming. Fantastic job.

[vanmunch]

Interesting project and the robot looks very professional.. I will look forward to seeing a video of it in action

Hey thanks. I'd like to do this kind of thing full time some day. I have some kind of dry demonstration videos and I was working on shooting a "fun" video outside today, but a big drop of sweet hit the prop chip and... nothing, so I'll have to order another board before I can complete the cool video, but I should be able to put up the others after this coming weekend. (I really need to switch to socketed stuff...)

Wow! Wow! Wow!

That is sooo cool!

I love your controller. Amazing.

Man, I'll go to any UPE if can win a set of those motors and wheels.

Another super amazing robot.

Thank you very much for taking time to document it.

Duane

Ya, I diffidently recommend going to a UPE. They're a ton of fun.

Are the camera and the Xbees on the same 2.4ghz?What kind of range are you getting?

Yip, they're both on 2.4ghz. They don't seem to mind each other too much. The camera that I bought was only ~$28 from Amazon and you have to tune the video receiver with the knob on the side. But!, the way the picture tunes in, it makes you feel like you're in one of those old 80's movies like the "Abyss", or "Aliens."

I haven't really tried to see how far it can go so far. Hopefully I'll be able to test it some more once I replace the prop board.

vanmunch,

Nice work! Very professional indeed!
Are those 1/4 scale servos in the robotic arm except for the gripper?
Regards,
TCIII

All of the brackets, base, gripper, and 1/4 scale servos are from Lynxmotion. They have great hardware.

Tremendous project and execution! You can sense the Forumista interest here in seeing more info & videos.

Well done, Dave. I want to know how easy/hard/dizzying it is to operate that arm with the camera mounted out on the arm. If ever you needed image stabilization, it's there!

Maybe a second cam on the base on a pan & tilt head... as long as I'm dreaming. Fantastic job.

I haven't really been able to drive it too much. There are some fancier wireless camera system (Servo city sells one) where you can have up to four cameras tied to one receiver and then flip between them, but those systems cost a couple of hundred dollars. I thought that you's also appreciate the plywood base. It's 5 ply birch plywood.

Thanks for the questions and the encouragement. I'll try and post the videos that I have, but it will probably be a week or so. Let me know if you have any other questions.

[vanmunch]

Video: Nuntius the Garden Avenger vs. The Weed!!!
http://www.youtube.com/watch?v=RnZ_UmJkjqs

[RonP]

I would like to build a similar Bot, someday. Very nice project.

Ron

[Oldbitcollector (Jeff)]

I'm completely blown away by this project. Awesome.

http://www.gadgetgangster.com/news/51/447


OBC

[vanmunch]

Thanks guys, and I'm honored OBC that you choose it for Gadget Gangster's project of the week!

[erco]

I'm lovin' that video & blooper!

[Ravenkallen]

That is really neat...I wonder how much weight the arm could lift?

[grininmonkey]

I think your project is great and well done!

I just ordered those motors and after watching the video, I'm wondering if that was full speed/pulse at any point ?

[vanmunch]

Hey gininmonkey,

Your right. The servos and the wheel moters are operating quite a bit slower than their max speed. I'm using the ramping feature in Servo_32_7 from the object exchange. It's a great object. What are you planning to build? You'll have to post it while/once it's done. Good luck and have fun.

Dave

[DiagSolutions]

HI Dave looks like you're the man! I am extremely new and inexperienced at this whole engineering and blogging thing. I am a student at Devry University looking to purchase a cmucam1. When I read the manual it stated that "The programming port allows the firmware to be downloaded to the SX28 using a SX-Key / Blitzer," which could be purchased through parallax. I see the SX28 but the sight says that the SX-Key and Blitzer are discontinued. Is this true? If so what can be used to replace one or the other.
The CMUcam is needed to detect color and distance, relay info to another system for data entry.
I saw the general forum for questions but could not figure out how to start a thread. Any help is greatly appreciated.

Thanks,

Dee

[vanmunch]

Hi Dee and welcome! Thanks for the vote of confidence, but that's a whole new can of worms that I don't have any experiance with. Your best bet is to use the "Sensors" forum and post your question (top left) or call/ send Parallax tec support. They are very helpful and friendly. Good luck with your project and let us know how it goes/is going.

Dave

[bomber]

Awesome!! Cool video, by the way.